Herbrand KK-35
Built: 2013-2016 · Series: Other models
More machines from model year 2013
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Herbrand KK-35 – long box body on a light commercial chassis: 4-cylinder diesel of 2,143 cm³, 6,200 mm length, 3,500 kg gross vehicle weight, 136 km/h, built 2013–2016
Light commercial vehicles up to 3.5 tonnes gross vehicle weight form vehicle class N1 and can be driven in the European Union on a category B licence. Within this class there are chassis onto which a bodybuilder fits its own body, often unusually long, rather than leaving the manufacturer's factory as a finished panel van. Going by its figures, the KK-35 belongs to this group.
Read on 3 more paragraphs
The KK-35 is powered by a 4-cylinder diesel engine of 2,143 cm³ and reaches a top speed of 136 km/h. With a gross vehicle weight of 3,500 kg and a kerb weight of 2,465 kg, 1,035 kg of payload remains. Overall length is 6,200 mm on a wheelbase of 3,670 mm and a width of 2,090 mm.
An overall length of 6,200 mm is unusually long for a vehicle in this weight class and points to a body that overhangs well beyond the 3,670 mm wheelbase, typical of loads that take up a lot of space without weighing much. Within EU class N1, such extended bodies are a common solution for bulky but light cargo.
When buying a used vehicle with such a long body, besides the usual check of engine and brakes, the condition of the rear overhang behind the back axle matters most, since it is heavily loaded over road irregularities and during loading. The connection between body and chassis should be checked for cracks and corrosion. Parts for the body itself are usually only available from the bodybuilder, while engine and chassis parts can be sourced through the regular trade for the base vehicle.
Sources: SpecCodex-Register: Kennwerte des Modells KK-35
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,143 cm³correct |
Dimensions and weights
| Length | 6,200 mmcorrect |
|---|---|
| Width | 2,090 mmcorrect |
| Wheelbase | 3,670 mmcorrect |
| Unladen weight | 2,465 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 136 km/hcorrect |
Frequently asked questions
How much does the Herbrand KK-35 weigh?
The unladen weight is 2,465 kg.
What is the gross vehicle weight of the Herbrand KK-35?
3,500 kg.
What engine does the Herbrand KK-35 have?
4 cylinders, 2,143 cm³ displacement.
How fast does the Herbrand KK-35 go?
Top speed is 136 km/h.
What are the dimensions of the Herbrand KK-35?
6,200 mm × 2,090 mm.
When was the Herbrand KK-35 built?
Production years: 2013-2016.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
