Hanomag Perfekt 301 – specifications
Series: Other models
The Hanomag Perfekt 301 is a machine built by Hanomag. The engine delivers 25 hp (19 kW), has 4 cylinders, with a displacement of 1,797 cm³. The machine is 3,300 mm long, 1,560 mm wide and 1,510 mm high. The unladen weight is 1,675 kg. The wheelbase measures 2,030 mm. Transmission: 6/2-manual gearbox. The engine is water-cooled. The model was built in Germany. The fuel is diesel. The gearbox offers 6 forward gears. There are also 2 reverse gears. Rated output across the Hanomag range ranges from 12 to 110 hp; the Perfekt 301 sits at the bottom of that range with 25 hp. Its immediate neighbours are the R 24 below it with 24 hp and the WD R 26 above it with 26 hp. Rated output across the Hanomag range ranges from 8.8 to 81 kW; here the Perfekt 301 sits at the bottom of that range with 19 kW. 200 Hanomag models across 22 series are on record.
Build year not documented · Data origin: Reference work (Wikipedia/Wikibooks) · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Hanomag – other models: collective page of German tractors outside the named ranges, from the R types through Granit, Brillant and Perfekt to the articulated Combitrac, 8.8 to 63 kW
This page gathers the Hanomag tractors the register could not assign to a named range, from the early pre-war R types to the post-war Granit, Brillant, Perfekt and Robust ranges and the articulated Combitrac models. Hanomag, the Hannoversche Maschinenbau AG, sold its farm-equipment division to Massey-Ferguson in 1971 and ended tractor production afterwards. The R types such as the R16, R22 or R40 carry roughly their power in hp in the number, while Combitrac models such as the C218 and R440 Combitrac are articulated four-wheel-drive tractors for use in vineyards and orchards.
Read on 3 more paragraphs
The register lists here 56 versions with 8.8 to 63 kW from one- to six-cylinder engines of 511 to 5,702 cm³, unladen weights of 800 to 3,750 kg, lengths of 2,340 to 3,990 mm, widths of 1,480 to 2,110 mm and heights of 1,450 to 2,390 mm; torque ranges from 117 to 265 Nm at rated speeds of 1,100 to 2,600 rpm. Most models run on diesel, a few early types on crude oil, and the R40 Holzgas on a wartime wood-gas unit.
In the 1950s and 1960s Hanomag was among the significant German tractor makers alongside Fendt, Deutz and Eicher, focused on mid-sized yard and field tractors as well as the specialised articulated Combitrac for special crops.
When buying used, on the older R types the cooling system, injection pump and gearbox condition matter, on the Combitrac models additionally the articulation joint and four-wheel-drive bearings; parts are now only found through Hanomag specialists and reproduction-parts makers.
Sources: SpecCodex register, model data: Hanomag (weitere Modelle)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 25 hp (19 kW)correct |
| Cylinders | 4correct |
| Displacement | 1,797 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,300 mmcorrect |
|---|---|
| Width | 1,560 mmcorrect |
| Height | 1,510 mmcorrect |
| Wheelbase | 2,030 mmcorrect |
| Unladen weight | 1,675 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|---|
| Gearbox | 6/2-manual gearbox gearboxcorrect |
| Forward gears | 6correct |
| Reverse gears | 2correct |
Origin and approval
| Plant | Germanycorrect |
|---|
Frequently asked questions
Area: Machines
Where this model stands
Power-to-weight ratio: 11.3 kW/t (19 kW / 1.7 t)
Power class: Compact (< 40 hp)
Stronger than 13% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 17 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
AGR 38
Brillant 600
Brillant 601L
Brillant 700
Brillant 701
C 218 Combitrac
Perfekt 401
R 24
R 40 G
R 40 Holzgas
R 40 J
R12
Sources: Tractor & Construction Plant Wiki (CC BY-SA 3.0) (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.