Hako Citymaster 1600 – specifications
Built: 2015-2020 · Series: Citymaster
The Citymaster series from Hako includes the Citymaster 1600. Production: 2015-2020. The engine delivers 55 kW, has 4 cylinders, with a displacement of 1,968 cm³. The machine is 4,015 mm long and 1,375 mm wide. The unladen weight is 1,965 kg. The gross vehicle weight is 3,500 kg. The Citymaster series covers 5 models. Rated output within it ranges from 24 to 55.4 kW; the Citymaster 1600 sits at the top of that range with 55 kW. Its immediate neighbours are the Citymaster 1250 below it with 33 kW and the Citymaster 1650 above it with 55.4 kW. Unladen weight within it ranges from 1,465 to 2,100 kg; here the Citymaster 1600 sits in the upper part of that range with 1,965 kg. 32 Hako models across 9 series are on record.
Data for the version built 2015-2020 · Data origin: Official register · sources
More machines from model year 2015
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Hako Citymaster: the collective page of Hako's municipal sweepers from Bad Oldesloe, from the Citymaster 600 to the Citymaster 1650 ZE, 24 to 55.4 kW, unladen weight 1,465 to 2,115 kg
Hako, headquartered in Bad Oldesloe, builds compact sweepers and municipal vehicles under the Citymaster name, listed in the register as tractors. The range spans from the small Citymaster 600 to the Citymaster 1650, whose ZE suffix marks a version with electric drive; the remaining 1250 and 1600 models fill the mid-size field.
Read on 3 more paragraphs
The register lists here 5 versions with 24 to 55.4 kW, three- and four-cylinder engines of 1,642 to 2,190 cm³, unladen weights of 1,465 to 2,115 kg, gross vehicle weights of 2,200 to 3,500 kg, lengths of 3,260 to 4,016 mm and widths of 1,200 to 1,375 mm.
Municipal vehicles in this class take on street sweeping, winter service, grounds care and light transport in cities and on company premises; their compact dimensions allow work even in narrow pedestrian zones and on footpaths. The electric ZE version targets city centres and emission-sensitive zones, where quiet, emission-free operation matters.
Buying used, check attachments (sweeping brushes, the suction unit) for wear, the condition of the hydraulics, and on the ZE version the battery and charge cycles, corrosion on the body and frame from salt and moisture in winter service, and the tyres and brakes after years of urban duty. Parts run directly through Hako. A test run of the sweeping and suction functions under load is worthwhile before purchase, since worn seals or belts often show only in operation.
Sources: SpecCodex register, model data: Hako Citymaster, Hako
Technical data
Engine
| Power | 55 kWcorrect |
|---|---|
| Cylinders | 4correct |
| Displacement | 1,968 cm³correct |
Dimensions and weights
| Length | 4,015 mmcorrect |
|---|---|
| Width | 1,375 mmcorrect |
| Unladen weight | 1,965 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Frequently asked questions
Used listings – figures from public listings
Between August and November 2026, speccodex recorded 8 public used-machine listings for Hako Citymaster 1600 on 2 platforms. Asking prices ranged from €16,950 to €38,950 (median €21,890), years of manufacture between 2014 and 2017.
Offered mainly in Germany (88%) and the Netherlands (12%); shares refer to listings that state a location.
Asking prices are sellers' demands, not achieved sale prices. Basis: public listings, recorded and analysed by speccodex. As of: 18 Nov 2026. Sellers usually do not state whether prices are net or gross.
Area: Machines
Where this model stands
Power-to-weight ratio: 28 kW/t (55 kW / 2 t)
Power class: Universal (40–100 hp)
Stronger than 51% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.