Hako Hakotrac T6
Built: 1960 to approx. 1900s · Series: Hakotrac
More machines from model year 1960
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Hako Hakotrac: compact multi-purpose implement carriers from Bad Oldesloe, Hakotrac 1200 and T6, 4.4 to 7.6 kW / 6 to 10 hp, single-cylinder petrol engines
The Hakotrac series comes from Hako of Bad Oldesloe in Schleswig-Holstein, a maker specialising in municipal cleaning and grounds-care equipment as well as compact multi-purpose implement carriers. Hako was founded in 1948 and gradually expanded its range from hand-guided small equipment to ride-on implement carriers such as the Hakotrac series. The Hakotrac 1200 and T6 are small implement carriers powered by single-cylinder petrol engines, built for grounds care, transport and small-scale winter service.
Read on 3 more paragraphs
The register lists 2 versions here with 4.4 to 7.6 kW (6 to 10 hp) from single-cylinder engines of 148 to 487 cm³, an unladen weight of around 190 kg, a length of 1,750 mm, a width of 550 mm and a height to the steering wheel of 1,090 mm at a rated speed of 4,500 rpm.
As compact implement carriers, Hakotrac models are aimed at municipal operators, nurseries and smaller farms that can be equipped flexibly for mowing, sweeping and transport work using interchangeable attachments. Quick tool changes without additional equipment are among the series' key design features.
When buying one of these small petrol engines, attention should go to the condition of the engine and carburettor, the function of the quick-change implement coupling, the tightness of the hydraulics, and frame rust, as well as the integrity of the frame and seat mount, which take heavy strain from frequent tool changes on these small implement carriers; spare parts are available through Hako's dealer network.
Sources: SpecCodex register, model data: Hako Hakotrac, Hako (manufacturer)
Technical data
Engine
| Power | 6 hp (4.4 kW)correct |
|---|---|
| Rated speed | 4,500 rpmcorrect |
| Cylinders | 1correct |
| Displacement | 148 cm³correct |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 1,750 mmcorrect |
|---|---|
| Width | 550 mmcorrect |
| Height | 1,090 mm (to steering wheel)correct |
| Wheelbase | 1,130 mmcorrect |
| Ground clearance | 210 mmcorrect |
| Unladen weight | 190 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 2/1-manual gearbox gearboxcorrect |
| Forward gears | 2correct |
| Front tyres | 4.00-8 AMcorrect |
| Rear tyres | 6.00-16 AScorrect |
| Top speed | 15 km/hcorrect |
Where this model stands
Power-to-weight ratio: 23.2 kW/t (4 kW / 0.2 t)
Power class: Compact (< 40 hp)
Stronger than 0% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Hako Hakotrac T6 have?
The Hako Hakotrac T6 delivers 6 hp.
How much does the Hako Hakotrac T6 weigh?
The unladen weight is 190 kg.
What engine does the Hako Hakotrac T6 have?
1 cylinders, 148 cm³ displacement.
How fast does the Hako Hakotrac T6 go?
Top speed is 15 km/h.
What are the dimensions of the Hako Hakotrac T6?
1,750 mm × 550 mm × 1,090 mm.
When was the Hako Hakotrac T6 built?
Production years: 1960–19??.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.