Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Goldoni › Star › Star 3070 Narrow Orchard

Goldoni Star 3070 Narrow Orchard 4WD

Series: Star

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Goldoni Star 3070 Narrow Orchard 4WD is a model in the Star series. The engine delivers 50.7 kW, has 4 cylinders, with a displacement of 2,971 cm³. Rated speed is 2,600 rpm. The machine is 3,220 mm long. Lifting capacity is 2,300 kg. The gearbox has 16 forward gears. There are also 8 reverse gears. The pump delivers 38.2 l/min. Tyre size: rear: 320/70x24. front: 240/70x16. The Star series covers 34 models. Rated output within it ranges from 35 to 71 kW; the Star 3070 Narrow Orchard sits in the middle of that range with 50.7 kW. Its immediate neighbours are the Star 70 below it with 50 kW and the Star 75 Quadrifoglio High above it with 53 kW. Lifting capacity within it ranges from 2,300 to 2,500 kg; here the Star 3070 Narrow Orchard sits at the bottom of that range with 2,300 kg. 120 Goldoni models across 8 series are on record.

Goldoni Star – narrow specialty tractors for vineyards and orchards: Narrow, Vineyard, Orchard and the number in the name

Goldoni of Migliarina di Carpi in Emilia-Romagna is one of Italy's specialists in narrow-track tractors, and the Star series is its offer for vineyards, orchards and greenhouses. These machines are deliberately narrow and low so they can work between tight vine rows and under low canopies without giving up pulling power or hydraulic capacity.

Read on 3 more paragraphs

The number in the name ranks the models roughly by power and size – Star 100 and the 3000 series with the 3050, 3060 and 3070. The suffixes describe the layout: Narrow Orchard and Vineyard stand for especially narrow versions, SL for a low overall height, High and Low separate seating position or ground clearance, Quadrifoglio and Max mark equipment lines, NRG and LE engine or equipment levels.

In the register the models run from 35 to 71 kW with 2,083 to 3,001 cm³ of displacement and three or four cylinders; the rear linkage lifts 2,300 to 2,500 kg depending on model, unladen weight lies between 1,850 and 2,520 kg, and top speed reaches 40 km/h.

Anyone buying a used Star should check the front axle and steering – narrow-track tractors spend much of their life with the wheels turned – as well as the hydraulics and implement mounts, which in orchard work carry sprayers and mulchers under constant load.

Sources: SpecCodex register, model data: Goldoni Star, Goldoni (manufacturer)

Technical data

Engine

Power50.7 kWcorrect
Rated speed2,600 rpmcorrect
Cylinders4correct
Displacement2,971 cm³correct

Dimensions and weights

Length3,220 mmcorrect

Drivetrain and chassis

Gearbox type24 speed with creepercorrect
Forward gears16correct
Reverse gears8correct
Tyre sizerear: 320/70x24, front: 240/70x16correct

Working data

Lifting capacity2,300 kgcorrect
Pump flow38.2 l/mincorrect

Other data

Cab height2,033 mmcorrect

Frequently asked questions

How much power does the Goldoni Star 3070 Narrow Orchard have?

The Goldoni Star 3070 Narrow Orchard delivers 50.7 kW.

What engine does the Goldoni Star 3070 Narrow Orchard have?

4 cylinders, 2,971 cm³ displacement.

How much does the rear linkage of the Goldoni Star 3070 Narrow Orchard lift?

The rear linkage lifts 2,300 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare