Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Goldoni › Other models › Ronin 50

Goldoni Ronin 50

Built: 2012 · Series: Other models

More machines from model year 2012

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Ronin 50 comes from Goldoni. Production: 2012. The engine delivers 48 hp (36 kW). The engine comes from Lombardini. The machine is 2,949 mm long and 1,098 mm wide. The wheelbase measures 1,723 mm. Ground clearance is 296 mm. Top speed is 30 km/h. The engine is water-cooled. The model was built in Italy. The fuel is diesel. The fuel is diesel. Rated output across the Goldoni range ranges from 14 to 95 hp; the Ronin 50 sits in the middle of that range with 48 hp. Its immediate neighbours are the Euro 45 below it with 42 hp and the 3050 DT above it with 49 hp. Rated output across the Goldoni range ranges from 10 to 71 kW; here the Ronin 50 sits in the middle of that range with 36 kW. 120 Goldoni models across 8 series are on record.

Goldoni – other models: compact and articulated tractors from Migliarina near Carpi, 10 to 71 kW, VM, Lombardini and Slanzi engines, S, Q and Maxter series

This collective page gathers Goldoni tractors outside the named series. Goldoni was founded in 1926 by Bortolo Goldoni and is based in Migliarina di Carpi in the Italian province of Modena; the company is known for compact and articulated tractors and, historically, for single-axle walking tractors (motocoltivatori). The model range spans the older S and Q series (S60 to S110, Q90 to Q110), the Energy, Maxter and Quasar types, through to the newer Transcar and Ronin models. Individual model names such as the Maxter 60 RS also show the collaboration with the Chinese manufacturer YTO.

Read on 3 more paragraphs

The register lists 49 versions from 10 to 71 kW and 14 to 95 hp with three- and four-cylinder engines of 1,116 to 2,777.6 cm³, diesel power throughout. The main engine suppliers are VM and Lombardini, alongside Slanzi, Fiat, John Deere and Yanmar.

With its compact, agile tractors, Goldoni mainly serves smaller holdings, specialist crops and municipal applications in Italy, where narrow row spacing and sloping ground call for compact dimensions. The range of different engine suppliers reflects the company's history across several model generations.

When buying, check the cooling system and injection pump on VM and Lombardini engines, and the articulation joint and steering cylinders on articulated models. Rust on sheet-metal parts and the condition of hydraulic hoses are common checks on the smaller compact models; engine spares are usually readily available from the respective engine makers.

Sources: SpecCodex register, model data: Goldoni (weitere Modelle), Goldoni (manufacturer)

Technical data

Engine

Engine makeLombardinicorrect
Fueldieselcorrect
Fueldieselcorrect
Power48 hp (36 kW)correct
Rated speed2800/mincorrect
Cylinders4 Hubraumcorrect
Coolingwater-cooledcorrect
Cooling systemWassercorrect

Dimensions and weights

Length2,949 mmcorrect
Width1,098 mmcorrect
Wheelbase1,723 mmcorrect
Ground clearance296 mmcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect
Top speed30 km/hcorrect
Drive typeGetriebecorrect

Origin and approval

PlantItalycorrect

Other data

Abmessungenbearbeiten zul. gesamtgew.2500 kgcorrect
Füllmengenbearbeiten treibstoff45 Lcorrect
Zuglast ungebremst1475 kgcorrect

Frequently asked questions

How much power does the Goldoni Ronin 50 have?

The Goldoni Ronin 50 delivers 48 hp.

How fast does the Goldoni Ronin 50 go?

Top speed is 30 km/h.

What are the dimensions of the Goldoni Ronin 50?

2,949 mm × 1,098 mm.

When was the Goldoni Ronin 50 built?

Production years: 2012.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare