Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Goldoni › BOXTER 25

Goldoni BOXTER 25

Built: 2012-2012 · Series: Other models

More machines from model year 2012

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The BOXTER 25 comes from Goldoni. Production: 2012. The engine delivers 25 hp (17.5 kW), has 3 cylinders, with a displacement of 1,116 cm³. The machine is 2,255 mm long and 1,197 mm wide. The unladen weight is 840 kg. The engine is water-cooled. The model was built in Italy. The gross vehicle weight is 1,400 kg. The fuel is diesel. The gearbox offers 8 gears. Rated output across the Goldoni range ranges from 14 to 95 hp; the BOXTER 25 sits at the bottom of that range with 25 hp. Its immediate neighbours are the Euro 26 RS below it with 23 hp and the 926 above it with 26 hp. Rated output across the Goldoni range ranges from 10 to 71 kW; here the BOXTER 25 sits at the bottom of that range with 17.5 kW. 120 Goldoni models across 8 series are on record.

Goldoni – other models: compact and articulated tractors from Migliarina near Carpi, 10 to 71 kW, VM, Lombardini and Slanzi engines, S, Q and Maxter series

This collective page gathers Goldoni tractors outside the named series. Goldoni was founded in 1926 by Bortolo Goldoni and is based in Migliarina di Carpi in the Italian province of Modena; the company is known for compact and articulated tractors and, historically, for single-axle walking tractors (motocoltivatori). The model range spans the older S and Q series (S60 to S110, Q90 to Q110), the Energy, Maxter and Quasar types, through to the newer Transcar and Ronin models. Individual model names such as the Maxter 60 RS also show the collaboration with the Chinese manufacturer YTO.

Read on 3 more paragraphs

The register lists 49 versions from 10 to 71 kW and 14 to 95 hp with three- and four-cylinder engines of 1,116 to 2,777.6 cm³, diesel power throughout. The main engine suppliers are VM and Lombardini, alongside Slanzi, Fiat, John Deere and Yanmar.

With its compact, agile tractors, Goldoni mainly serves smaller holdings, specialist crops and municipal applications in Italy, where narrow row spacing and sloping ground call for compact dimensions. The range of different engine suppliers reflects the company's history across several model generations.

When buying, check the cooling system and injection pump on VM and Lombardini engines, and the articulation joint and steering cylinders on articulated models. Rust on sheet-metal parts and the condition of hydraulic hoses are common checks on the smaller compact models; engine spares are usually readily available from the respective engine makers.

Sources: Kennwerte der Modelle Goldoni (weitere Modelle), Goldoni (Hersteller)

Technical data

Engine

Fueldieselcorrect
Power25 hp (17.5 kW)correct
Cylinders3correct
Displacement1,116 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length2,255 mmcorrect
Width1,197 mmcorrect
Unladen weight840 kgcorrect
Gross vehicle weight1,400 kgcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect
Gears8correct

Origin and approval

PlantItalycorrect

Where this model stands

Power-to-weight ratio: 20.8 kW/t (18 kW / 0.8 t)

Power class: Compact (< 40 hp)

Stronger than 10% of the tractors in the register — out of 15,659 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Goldoni BOXTER 25 have?

The Goldoni BOXTER 25 delivers 25 hp.

How much does the Goldoni BOXTER 25 weigh?

The unladen weight is 840 kg.

What is the gross vehicle weight of the Goldoni BOXTER 25?

1,400 kg.

What engine does the Goldoni BOXTER 25 have?

3 cylinders, 1,116 cm³ displacement, Diesel.

What are the dimensions of the Goldoni BOXTER 25?

2,255 mm × 1,197 mm.

When was the Goldoni BOXTER 25 built?

Production years: 2012.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare