Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Goldoni › Euro › Euro 45 SN

Goldoni Euro 45 SN

Built: 2011-2012 · Series: Euro

More machines from model year 2011

Source: goldoni.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Euro series from Goldoni includes the Euro 45 SN. Production: 2011-2012. The engine delivers 28 kW, has 3 cylinders, with a displacement of 1,649 cm³. The machine is 2,985 mm long and 1,302 mm wide. The unladen weight is 1,360 kg. The gross vehicle weight is 2,100 kg. The gearbox offers 6 gears. The Euro series covers 12 models. Rated output within it ranges from 17 to 37 kW; the Euro 45 SN sits in the middle of that range with 28 kW. Its immediate neighbours are the Euro 45 RS below it with 27.1 kW and the Euro 50 A above it with 31 kW. Unladen weight within it ranges from 1,100 to 1,360 kg; here the Euro 45 SN sits at the top of that range with 1,360 kg. 120 Goldoni models across 8 series are on record.

Goldoni Euro – compact tractors with reversible operator station from Migliarina di Carpi: Euro 26 to Euro 55, RS for the reversible station, the number as hp, Lombardini and VM engines, 17 to 37 kW

The Euro range is Goldoni's compact tractor for vegetable growing, greenhouses, nurseries and small vineyards – the class below the Star range with which the maker from Migliarina di Carpi in Emilia-Romagna serves the niche of Italian small tractors. The type logic: the number roughly gives the output in hp, from Euro 26 to Euro 55; RS marks the version with reversible operator station (Reversibile), where seat and steering wheel turn 180 degrees so the operator has the rotavator, mulcher or mower at the rear in front of them – Goldoni's hallmark, which hardly any other maker offers in this class; SN stands for a narrow version, A and AW for equipment variants. The engines come from Lombardini and VM: two- and three-cylinders of 1.1 to 1.9 litres, air- or water-cooled, at 2,800 rpm rated speed.

Read on 3 more paragraphs

The register lists 12 versions with 17 to 37 kW (23 to 50 hp), 1,121 to 1,871 cm³ with two or three cylinders, unladen weights from 1,100 to 1,360 kg, lengths from 2,770 to 3,010 mm and widths from 1,103 mm.

The reversible station is more than comfort: it turns the small tractor into a tool carrier that works backwards with a rear rotavator as if front-mounted – in greenhouses, where turning is impossible, the decisive advantage.

On used tractors, operating hours, engine condition, gearbox and reversing mechanism of the station, hydraulics and PTO and parts supply, which for Lombardini and VM engines runs through their dealers independently of Goldoni, are what count.

Sources: SpecCodex register, model data: Goldoni Euro, Goldoni (manufacturer)

Technical data

Engine

Power28 kWcorrect
Cylinders3correct
Displacement1,649 cm³correct

Dimensions and weights

Length2,985 mmcorrect
Width1,302 mmcorrect
Unladen weight1,360 kgcorrect
Gross vehicle weight2,100 kgcorrect

Drivetrain and chassis

Gears6correct

Where this model stands

Power-to-weight ratio: 20.6 kW/t (28 kW / 1.4 t)

Power class: Compact (< 40 hp)

Stronger than 24% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Goldoni Euro 45 SN have?

The Goldoni Euro 45 SN delivers 28 kW.

How much does the Goldoni Euro 45 SN weigh?

The unladen weight is 1,360 kg.

What is the gross vehicle weight of the Goldoni Euro 45 SN?

2,100 kg.

What engine does the Goldoni Euro 45 SN have?

3 cylinders, 1,649 cm³ displacement.

What are the dimensions of the Goldoni Euro 45 SN?

2,985 mm × 1,302 mm.

When was the Goldoni Euro 45 SN built?

Production years: 2011-2012.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare