Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Goldoni › Euro 30 RS

Goldoni Euro 30 RS 4WD

Series: Euro

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Goldoni Euro 30 RS 4WD belongs to the Euro series. The engine delivers 19 kW, has 2 cylinders, with a displacement of 1,248.7 cm³. Rated speed is 2,800 rpm. The machine is 2,870 mm long. The unladen weight is 1,100 kg. Top speed is 30.1 km/h. The tank holds 24.2 litres. The gearbox has 6 forward gears. There are also 3 reverse gears. The pump delivers 18.5 l/min. Tyre size: 7,50x16\". The Euro series covers 12 models. Rated output within it ranges from 17 to 37 kW; the Euro 30 RS sits at the bottom of that range with 19 kW. Its immediate neighbours are the Euro 30 SN below it with 18 kW and the Euro 40 RS above it with 24 kW. Unladen weight within it ranges from 1,100 to 1,360 kg; here the Euro 30 RS sits at the bottom of that range with 1,100 kg. 120 Goldoni models across 8 series are on record.

Goldoni Euro – compact tractors with reversible operator station from Migliarina di Carpi: Euro 26 to Euro 55, RS for the reversible station, the number as hp, Lombardini and VM engines, 17 to 37 kW

The Euro range is Goldoni's compact tractor for vegetable growing, greenhouses, nurseries and small vineyards – the class below the Star range with which the maker from Migliarina di Carpi in Emilia-Romagna serves the niche of Italian small tractors. The type logic: the number roughly gives the output in hp, from Euro 26 to Euro 55; RS marks the version with reversible operator station (Reversibile), where seat and steering wheel turn 180 degrees so the operator has the rotavator, mulcher or mower at the rear in front of them – Goldoni's hallmark, which hardly any other maker offers in this class; SN stands for a narrow version, A and AW for equipment variants. The engines come from Lombardini and VM: two- and three-cylinders of 1.1 to 1.9 litres, air- or water-cooled, at 2,800 rpm rated speed.

Read on 3 more paragraphs

The register lists 12 versions with 17 to 37 kW (23 to 50 hp), 1,121 to 1,871 cm³ with two or three cylinders, unladen weights from 1,100 to 1,360 kg, lengths from 2,770 to 3,010 mm and widths from 1,103 mm.

The reversible station is more than comfort: it turns the small tractor into a tool carrier that works backwards with a rear rotavator as if front-mounted – in greenhouses, where turning is impossible, the decisive advantage.

On used tractors, operating hours, engine condition, gearbox and reversing mechanism of the station, hydraulics and PTO and parts supply, which for Lombardini and VM engines runs through their dealers independently of Goldoni, are what count.

Sources: SpecCodex register, model data: Goldoni Euro, Goldoni (manufacturer)

Technical data

Engine

Power19 kWcorrect
Rated speed2,800 rpmcorrect
Cylinders2correct
Displacement1,248.7 cm³correct

Dimensions and weights

Length2,870 mmcorrect
Unladen weight1,100 kgcorrect

Drivetrain and chassis

Forward gears6correct
Reverse gears3correct
Tyre size7.50x16\"correct
Top speed30.1 km/hcorrect

Working data

Pump flow18.5 l/mincorrect
Fuel tank capacity24.2 lcorrect

Other data

Cab height1,972.1 mmcorrect

Where this model stands

Power-to-weight ratio: 17.3 kW/t (19 kW / 1.1 t)

Power class: Compact (< 40 hp)

Stronger than 13% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Goldoni Euro 30 RS have?

The Goldoni Euro 30 RS delivers 19 kW.

How much does the Goldoni Euro 30 RS weigh?

The unladen weight is 1,100 kg.

What engine does the Goldoni Euro 30 RS have?

2 cylinders, 1,249 cm³ displacement.

How fast does the Goldoni Euro 30 RS go?

Top speed is 30.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare