Gergen TTA 13 ADONIS
Built: 2022 · Series: Other models
More machines from model year 2022
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Gergen TTA 13 Adonis – compact, heavy EU class O4 trailer: 13,500 kg gross weight, 10,930 kg payload, only 5.15 m length, built in 2022.
With a gross weight of 13,500 kg, the Gergen TTA 13 Adonis falls into EU trailer class O4, just above the 10-tonne threshold. Built in 2022, it is one of the newer vehicles in its weight class in the register.
Read on 3 more paragraphs
With an unladen weight of 2,570 kg, payload comes to 10,930 kg, more than four-fifths of the gross weight – an exceptionally high payload for its weight class on a very short area, given a length of only 5.15 m and a width of 2.55 m. The trailer runs on four wheels, that is a tandem axle; the two axles sit closely together, around 1.27 m apart.
This combination of very short length, low unladen weight and high payload points to a compact heavy-duty trailer for dense, concentrated loads such as containers, machinery or building materials rather than a volume vehicle. Class O4 trailers run with air brakes; towing it as a combination requires driving licence category CE in the EU.
When buying a still-young, compact heavy-duty trailer, despite its low age it is worth checking the frame for deformation caused by concentrated heavy loads, especially around the closely spaced tandem axle. Check axle bearings and brake linings for early wear, check the air lines for leaks, inspect the load floor for damage from prior use, and check the coupling and electrical connectors for secure, corrosion-free contact.
Sources: SpecCodex-Register: Kennwerte des Modells Gergen TTA 13 Adonis, Zulassungsdaten RDW (Niederlande)
Technical data
Dimensions and weights
| Length | 5,150 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 1,270 mmcorrect |
| Unladen weight | 2,570 kgcorrect |
| Gross vehicle weight | 13,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Gergen TTA 13 ADONIS weigh?
The unladen weight is 2,570 kg.
What is the gross vehicle weight of the Gergen TTA 13 ADONIS?
13,500 kg.
Up to what speed is the Gergen TTA 13 ADONIS approved?
Approved up to 100 km/h.
What are the dimensions of the Gergen TTA 13 ADONIS?
5,150 mm × 2,550 mm.
When was the Gergen TTA 13 ADONIS built?
Production years: 2022.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
