Gehl CT6-18 Turbo
Series: Gehl Telescopic Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Gehl telehandlers DL, RS and CT – from West Bend, Wisconsin, Manitou since 2008: capacity in thousands of pounds and lift height in feet, DL7-44 to DL12-40, 43 to 86 kW
Gehl of West Bend, Wisconsin, founded in 1859 as a farm-machinery works, built telehandlers for American building construction and agriculture from the 1980s and has belonged since 2008 to the French Manitou group, which continues the brand alongside Mustang as its US arm. The type logic follows the American convention: DL stands for Dynalift, the classic range, RS for the later range, CT for the compact telehandlers; the first number gives the capacity in thousands of pounds, the second the lift height in feet – a DL7-44 lifts 7,000 lb to 44 ft, a DL12-40 12,000 lb to 40 ft, an RS5-19 5,000 lb to 19 ft, a CT5-16 5,000 lb to 16 ft. The older 6H, 6L and 8H are the forerunners of the 1980s, Turbo and Low Profile mark engine and height variants.
Read on 3 more paragraphs
The register lists 21 versions with 43.3 to 85.8 kW from John Deere 4045T and Perkins 1103/1104 engines of 3,294 to 4,392 cm³, rated speeds of 1,400 to 2,750 rpm, service weights from 4,536 to 12,909 kg and heights from 1,930 to 2,600 mm.
Gehl's telehandlers are the machines of American masonry and drywall sites: lifting pallets onto scaffolds and floor slabs, side-shifting with the carriage – the tie-up with Manitou brought European hydraulics into the American design.
On used machines, operating hours, wear of the boom wear pads, play in boom and axles, the condition of the cylinders and parts supply, which runs through Manitou and Gehl dealers, are what count.
Sources: SpecCodex register, model data: Gehl Teleskoplader, Gehl (Manitou Group, Hersteller)
Technical data
Engine
| Engine model | 1104-C44Tcorrect |
|---|---|
| Power | 102.4 hp (75.3 kW)correct |
| Rated speed | 1,400 rpmcorrect |
| Torque | 412.2 Nmcorrect |
| Cylinders | 4correct |
| Displacement | 4,391.7 cm³correct |
| Aspiration | turbochargedcorrect |
Dimensions and weights
| Height | 2,300 mmcorrect |
|---|---|
| Unladen weight | 6,121.7 kgcorrect |
Drivetrain and chassis
| Gearbox type | 4-speed power-shiftcorrect |
|---|---|
| Forward gears | 4correct |
| Reverse gears | 4correct |
| Tyre size | 17.5 LR x 24correct |
Working data
| Lift height | 5,550 mmcorrect |
|---|---|
| Pump flow | 98.4 l/mincorrect |
| Hydraulic oil capacity | 135.1 lcorrect |
| Hydraulic pressure | 259.9 barcorrect |
| Fuel tank capacity | 104.1 lcorrect |
Where this model stands
Power-to-weight ratio: 12.3 kW/t (75 kW / 6.1 t)
Stronger than 53% of the telehandlers in the register — out of 661 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Gehl CT6-18 Turbo have?
The Gehl CT6-18 Turbo delivers 102 hp.
How much does the Gehl CT6-18 Turbo weigh?
The unladen weight is 6,122 kg.
What engine does the Gehl CT6-18 Turbo have?
4 cylinders, 4,392 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data
Telehandler in 3D section
Turn the model, look inside and click an assembly — each one is explained.
