Fscurtis Y2-180M-2
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
FS-Curtis – other models: the collective page for compressor drive motors outside the named series, frame sizes 90 to 200, 1.3 to 37 kW, two- to six-pole, made in China, 415 V
This page gathers three-phase motors listed in the register under the name of the US compressor manufacturer FS-Curtis. The type plates follow the Y2 platform widely used in China, a nationwide standard range of three-phase induction motors, as seen in designations such as Y2-160L-2 and Y2-200L2-2; only one model carries a different designation, YLS-1300W-6P. FS-Curtis has built piston and screw compressors since the 19th century and registers the associated drive motors for the Australian and New Zealand market under its own name.
Read on 3 more paragraphs
The register lists 10 versions with 1.3 to 37 kW rated output, two- to six-pole, at a uniform supply voltage of 415 V. Full-load efficiency ranges from 79.8 to 92.62%, and at 75% load from 77 to 92.42%. Frame sizes span 90 to 200, and the protection class ranges from IP44 to IP55.
As a compressor drive, these motors must withstand often continuous full-load operation and the mechanical load from the belt or direct drive of the compression stage. The uniform 415 V supply voltage matches the industrial three-phase mains customary in Australia and New Zealand.
For a replacement, these compressor motors call above all for matching the shaft end and pulley diameter to the existing compressor, plus checking bearing condition, which is additionally radially loaded by belt tension. The predominant B3 mounting code simplifies replacement with other power ratings within the same range.
Sources: SpecCodex register, model data: FS-Curtis (weitere Modelle), Zulassungsdaten GEMS/MEPS (Australien, Neuseeland)
Technical data
Engine
| Rated output | 22 kWcorrect |
|---|
Electrical data
| Rated voltage | 415 Vcorrect |
|---|---|
| Number of poles | 2correct |
| Protection class | IP55correct |
| Frame size | 180 M (foot)correct |
| Mounting (IEC 60034-7) | B3correct |
| Efficiency at full load | 91.39 %correct |
| Efficiency at 75 % load | 91.02 %correct |
| Efficiency at half load | 89.28 %correct |
Origin and approval
| Country of manufacture | Chinacorrect |
|---|
Other data
| Standard applied | Greenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct |
|---|---|
| Test method | IEC 61972correct |
Frequently asked questions
How much power does the Fscurtis Y2-180M-2 have?
The Fscurtis Y2-180M-2 delivers 22 kW.
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- Check the ingress rating against the installation site — outdoors or in dust the demands differ.
- Hold the mounting form and dimensions against the existing seat before ordering.
- The pole count sets the speed — when replacing an older unit, compare this first.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · How we check the data
Electric motor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
