Fordson DEXTA/1870-64
Built: 1964 · Series: DEXTA
More machines from model year 1964
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fordson Dexta – Compact British Tractor, 1957 to 1964: three-cylinder Perkins diesel with 22.8 to 29.4 kW, 2,350 to 2,502 cm³ displacement, water-cooled
From 1957, the Dexta complemented the larger Fordson Major with a more compact tractor for smaller farms; the register lists models up to 1964. Output of the recorded models ranges from 22.8 to 29.4 kW, at a displacement of 2,350 to 2,502 cm³, predominantly with three-cylinder engines.
Read on 3 more paragraphs
Recorded operating weight runs from 1,376 to 1,485 kg, wheelbase from 1,867 to 1,876 mm, and top speed of the listed models spans 20 to 23 km/h. The Dexta used a diesel engine developed by Perkins, setting it apart technically from the petrol-engine heritage of earlier Fordson models.
The Dexta was one of the first affordable diesel tractors for smaller farms in Britain, shaping an entire class of compact post-war tractors. For historic examples, check the engine condition and hydraulic system, as parts for some components are now rare.
Perkins, now part of the US Caterpillar group, still runs its own parts and service network for its historic as well as current diesel engines; wear parts for the Dexta engine can therefore often be sourced independently of specialists dealing solely in Fordson. The Dexta's PTO and lift matched the standard typical for its power class, with a 540 rpm speed and a category I three-point hitch under ISO 730. Other British tractor makers of the period also relied on Perkins engines, which eases the search for parts across the industry.
Sources: SpecCodex register, model data: Fordson DEXTA
Technical data
Engine
| Power | 29.4 kWcorrect |
|---|---|
| Displacement | 2,360 cm³correct |
Dimensions and weights
| Width | 1,600 mmcorrect |
|---|---|
| Unladen weight | 1,400 kgcorrect |
Where this model stands
Power-to-weight ratio: 21 kW/t (29 kW / 1.4 t)
Power class: Compact (< 40 hp)
Stronger than 25% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Fordson DEXTA/1870-64 have?
The Fordson DEXTA/1870-64 delivers 29.4 kW.
How much does the Fordson DEXTA/1870-64 weigh?
The unladen weight is 1,400 kg.
What engine does the Fordson DEXTA/1870-64 have?
2,360 cm³ displacement.
When was the Fordson DEXTA/1870-64 built?
Production years: 1964.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
DEXTA / 1870
DEXTA/1870 SPECIAL
DEXTA/1870-60
DEXTA/1870-62
Dexta
Dexta (957 E)
Dexta-Special
Super Dexta (960 E)
dexta/1870-61
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.