Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Ford › Umpikorinen (BB) › Umpikorinen (BB) 2402cm3

Ford Umpikorinen (BB) 2402cm3

Built: 2007 · Series: Umpikorinen (BB)

More machines from model year 2007

Source: landwirt.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the Umpikorinen (BB) 2402cm3, Ford offers a model from the Umpikorinen (BB) series. Production: 2007. The engine delivers 103 kW, has 4 cylinders, with a displacement of 2,402 cm³. The vehicle is 5,680 mm long and 1,970 mm wide. The unladen weight is 2,310 kg. The gross vehicle weight is 3,550 kg. The gearbox offers 6 gears. The Umpikorinen (BB) series covers 24 models. Rated output within it ranges from 66 to 261 kW; the Umpikorinen (BB) 2402cm3 sits in the lower part of that range with 103 kW. Its immediate neighbours are the Umpikorinen (BB) 4ov 2402cm3 below it with 94 kW and the Umpikorinen (BB) 4ov 7270cm3 A above it with 132 kW. Unladen weight within it ranges from 2,150 to 3,810 kg; here the Umpikorinen (BB) 2402cm3 sits at the bottom of that range with 2,310 kg. 5516 Ford models across 101 series are on record.

Ford Umpikorinen (BB) – Finnish registration collective page for Ford trucks with an enclosed box body: four- to eight-cylinders, 2,198 to 7,300 cc, 66 to 261 kW, gross weight up to 8,500 kg

This page is not a distinct Ford range but a Finnish registration collective page: Umpikorinen denotes in the Finnish vehicle register the body type of a truck with an enclosed box body, and BB is the official short code for it. Gathered here are Ford trucks of various model years and ranges with this body type, from light box vans to heavier distribution trucks. The model names in the register mostly give only the engine displacement in cubic centimetres, without the actual Ford type designation.

Read on 3 more paragraphs

The register lists here 24 versions with 66 to 261 kW from four- to eight-cylinders of 2,198 to 7,300 cc, unladen weights from 2,150 to 5,750 kg, gross vehicle weights from 3,550 to 8,500 kg, lengths from 5,330 to 6,700 mm and widths from 1,950 to 2,400 mm.

As enclosed box bodies these Ford trucks mainly served distribution and trade work where loads need weather-protected transport; the wide span of displacement and weight shows that light van chassis and medium-weight distribution trucks are gathered here alike.

Buying a used Ford of this body type, what matters is the condition of the load floor and box body, weatherproofing against moisture, and depending on the model year, corrosion on the frame and door sills. Parts are supplied by Ford dealers in Finland, supplemented for older years by independent commercial workshops.

Sources: SpecCodex register, model data: Ford Umpikorinen (BB), Zulassungsdaten Traficom (Finnland), Ford (manufacturer)

Technical data

Engine

Power103 kWcorrect
Cylinders4correct
Displacement2,402 cm³correct

Dimensions and weights

Length5,680 mmcorrect
Width1,970 mmcorrect
Unladen weight2,310 kgcorrect
Gross vehicle weight3,550 kgcorrect

Drivetrain and chassis

Gears6correct

Where this model stands

Power-to-weight ratio: 44.6 kW/t (103 kW / 2.3 t)

Stronger than 7% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ford Umpikorinen (BB) 2402cm3 have?

The Ford Umpikorinen (BB) 2402cm3 delivers 103 kW.

How much does the Ford Umpikorinen (BB) 2402cm3 weigh?

The unladen weight is 2,310 kg.

What is the gross vehicle weight of the Ford Umpikorinen (BB) 2402cm3?

3,550 kg.

What engine does the Ford Umpikorinen (BB) 2402cm3 have?

4 cylinders, 2,402 cm³ displacement.

What are the dimensions of the Ford Umpikorinen (BB) 2402cm3?

5,680 mm × 1,970 mm.

When was the Ford Umpikorinen (BB) 2402cm3 built?

Production years: 2007.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare