Ford CL30 skid-steer
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Ford – other models: the collective page of backhoe loaders and compact loaders outside the named ranges, 450 to 655C backhoe and CL30 skid-steer, 22 to 48 kW, Ford and Wisconsin engines
This page gathers the Ford construction machines the register could not assign to a named range – backhoe loaders and one compact loader. Ford's construction equipment division built the 450 to 655 backhoe range, whose last digits mark the power class and the letter A or B the generation; the division merged into Fiat-Hitachi and later New Holland Construction in 1991 as part of the merger with Fiat's construction equipment business. The CL30 is a skid-steer compact loader from the same range.
Read on 4 more paragraphs
The register lists here 7 versions with 22 to 48 kW (30 to 65 hp), with engines from Ford and Wisconsin, mostly diesel.
Ford's 550 and 655 backhoe loaders were, in the 1980s and 1990s, alongside JCB and Case among the common construction machines on building sites in North America and Europe, and mark the era before Ford sold its construction equipment business to Fiat and later New Holland.
On the 550 and 655 range's backhoe arm, the bucket can be swapped via a mechanical or hydraulic quick coupler, allowing a change between trenching, digging and slope buckets without removing the pivot pins; on the front loader end, the same quick-hitch mount takes pallet forks or a snow blade.
On used backhoe loaders, the condition of the excavator arm and loader bucket, hydraulic cylinders and hoses, transmission and axles, and frame cracks at the pivot points count; spares now run through the successor network of New Holland Construction and independent construction-equipment dealers.
Sources: SpecCodex register, model data: Ford Pozostale modele (Bagger & Verdichtung)
Technical data
Engine
| Engine make | Wisconsincorrect |
|---|---|
| Fuel | Gascorrect |
| Power | 30 hp (22 kW)correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|
Frequently asked questions
How much power does the Ford CL30 skid-steer have?
The Ford CL30 skid-steer delivers 30 hp.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · How we check the data
Excavator in 3D section
Turn the model, look inside and click an assembly — each one is explained.
