Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fiatagri › 66 S series › 45-66 (DT)

Fiatagri 45-66 (DT)

Built: 1992–1996 · Series: 66er S-Baureihe

More machines from model year 1992

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 66er S series from Fiatagri includes the 45-66 (DT). Production: 1992–1996. The engine delivers 45 hp (33.1 kW), has 3 cylinders, with a displacement of 2,710 cm³. Torque is 144.6 Nm. Rated speed is 2,500 rpm. The machine is 3,240 mm long, 1,540 mm wide and 2,270 mm high. The unladen weight is 1,960 kg. The wheelbase measures 1,999 mm. Ground clearance is 375 mm. Top speed is 30 km/h. Transmission: 12V/4R, 20V/8R and 12V/12R. The engine is water-cooled. Tyres: front 6.00-16 ASF (DT: 300/70 R 20 AS), rear 380/70 R 28 AS. The fuel is diesel. The bore measures 100 mm. The stroke is 115 mm. The compression ratio is 17:1. Maximum torque is reached at 1,200 rpm. The 66er S-Baureihe series covers 8 models. Rated output within it ranges from 45 to 80 hp; the 45-66 (DT) sits at the bottom of that range with 45 hp. Its immediate neighbours are the 50-66 S (DT) above it with 50 hp. Unladen weight within it ranges from 1,960 to 2,815 kg; here the 45-66 (DT) sits at the bottom of that range with 1,960 kg. 137 Fiatagri models across 14 series are on record.

Fiatagri 66 S series (1980s) – the second edition of the 66s from Turin: 45-66 to 80-66 S, the first number as hp class, S for the revised series, DT for four-wheel drive

The 66 range was Fiat's mid-range of the 1980s and one of Italy's most-built tractors; the S version is its second edition with new bonnet, revised cab and stronger hydraulics, which Fiatagri – since 1984 the group's farm-machinery brand – introduced in the second half of the decade. The type logic is the Fiat convention: the first number gives the hp class – 45-66 about 45 hp, 60-66 60 hp, 80-66 about 80 hp – 66 the series, S the revised version, DT four-wheel drive (doppia trazione). The engines are the 8000 series from Turin: the three-cylinder 8035 of 2.7 litres in the small, the four-cylinder 8045 of 3.9 litres in the big models, at 2,500 rpm – the same engines that later continued in the New Holland TN and TL.

Read on 3 more paragraphs

The register lists 8 versions with 33.1 to 58.9 kW from three- and four-cylinders of 2,710 to 3,908 cm³, torque from 145 to 224 Nm, unladen weights from 1,960 to 2,815 kg, lengths from 3,240 to 3,920 mm, widths from 1,540 to 2,420 mm and heights from 2,245 to 2,560 mm.

The 66 S are still at work in Italy, Spain, Greece, Turkey and North Africa today – simple mechanical tractors whose design Fiat also had built under licence in Turkey (Türk Traktör) and India.

On used tractors, operating hours, clutch and gearbox, four-wheel-drive front axle on DT models, the condition of hydraulics and cab and parts supply, unproblematic through New Holland for the 8000 series, are what count.

Sources: SpecCodex register, model data: Fiatagri 66er S-Baureihe, New Holland Agriculture (Rechtsnachfolger Fiatagri)

Technical data

Engine

Fueldieselcorrect
Power45 hp (33.1 kW)correct
Rated speed2,500 rpmcorrect
Torque144.6 Nmcorrect
Speed at max. torque1,200 rpmcorrect
Cylinders3correct
Displacement2,710 cm³correct
Bore100 mmcorrect
Stroke115 mmcorrect
Compression ratio17correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,240 mmcorrect
Width1,540 mmcorrect
Height2,270 mmcorrect
Wheelbase1,999 mmcorrect
Ground clearance375 mmcorrect
Unladen weight1,960 kgcorrect

Drivetrain and chassis

Driverear- or four-wheel drivecorrect
Gearbox12V/4R, 20V/8R and 12V/12Rcorrect
Front tyres6.00-16 ASF (DT: 300/70 R 20 AS)correct
Rear tyres380/70 R 28 AScorrect
Top speed30 km/hcorrect

Where this model stands

Power-to-weight ratio: 16.9 kW/t (33 kW / 2 t)

Power class: Universal (40–100 hp)

Stronger than 29% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fiatagri 45-66 (DT) have?

The Fiatagri 45-66 (DT) delivers 45 hp.

How much does the Fiatagri 45-66 (DT) weigh?

The unladen weight is 1,960 kg.

What engine does the Fiatagri 45-66 (DT) have?

3 cylinders, 2,710 cm³ displacement, Diesel.

How fast does the Fiatagri 45-66 (DT) go?

Top speed is 30 km/h.

What are the dimensions of the Fiatagri 45-66 (DT)?

3,240 mm × 1,540 mm × 2,270 mm.

When was the Fiatagri 45-66 (DT) built?

Production years: 1992–1996.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare