Fiat/pezetmot DUCATO
Built: 2016 · Series: Other models
More machines from model year 2016
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fiat Ducato/Pezetmot – chassis with body: 2.3-litre four-cylinder diesel, 1,127kg payload, 4,040mm wheelbase, 2,200mm width, model year 2016
This vehicle is also based on the Fiat Ducato. This entry describes a chassis of this range fitted with a body marked Pezetmot. Fiat has built the Ducato since 1981, with the current third generation (type 250) in production since 2006 through several technical updates; the chassis has always served both as a factory panel van and as a base for third-party bodies.
Read on 3 more paragraphs
The four-cylinder diesel engine has a displacement of 2,287cc. With a gross vehicle weight of 3,500kg and an unladen weight of 2,373kg, a payload of 1,127kg remains. The wheelbase is 4,040mm, the width 2,200mm.
With a payload of over a tonne at the 3.5-tonne limit, the vehicle ranks among the high-payload versions in its EU category N1 and can be driven on a category B licence as long as 3,500kg is not exceeded. A payload of this size allows, besides ordinary goods transport, the fitting of heavier trade equipment without moving up to the next vehicle category, which would require different licensing.
When buying used, the usual Ducato chassis points apply – timing belt, brakes, corrosion on the floor pan and wheel arches – along with the mounting of the body to the frame. With regularly heavy loads, the suspension and brake system deserve particular attention. Spare parts for the chassis are readily available, while parts for the special body are available only to a limited extent. With a body whose maker is not among the large, well-known bodybuilders, it is also worth closely checking the quality of seams, weld points and paintwork, as differences here can be greater than on the chassis itself.
Sources: SpecCodex-Register: Kennwerte des Modells DUCATO
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,287 cm³correct |
Dimensions and weights
| Width | 2,200 mmcorrect |
|---|---|
| Wheelbase | 4,040 mmcorrect |
| Unladen weight | 2,373 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Fiat/pezetmot DUCATO weigh?
The unladen weight is 2,373 kg.
What is the gross vehicle weight of the Fiat/pezetmot DUCATO?
3,500 kg.
What engine does the Fiat/pezetmot DUCATO have?
4 cylinders, 2,287 cm³ displacement.
When was the Fiat/pezetmot DUCATO built?
Production years: 2016.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
