Fiat/kegger DUCATO
Built: 2021 · Series: Other models
More machines from model year 2021
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fiat Ducato/Kegger – long, light body: 2.3-litre four-cylinder diesel, 1,535kg payload, 7,250mm length, 4,040mm wheelbase, 161km/h top speed, model year 2021
This vehicle is also based on the Fiat Ducato. This entry describes a chassis of this range fitted with a body marked Kegger. Fiat has built the Ducato since 1981, with the current third generation (type 250) in production since 2006.
Read on 3 more paragraphs
The four-cylinder diesel engine has a displacement of 2,287cc, and top speed is given as 161km/h. With a gross vehicle weight of 3,500kg and an unladen weight of 1,965kg, a payload of 1,535kg remains. A length of 7,250mm, on a wheelbase of 4,040mm and a width of 2,060mm, corresponds to a chassis with a long but light body.
A payload of 1,535kg at a vehicle length of 7,250mm shows that the body itself is comparatively light and leaves a large share of the 3,500kg limit free for cargo. The vehicle falls under EU category N1 and can be driven on a category B licence as long as 3,500kg is not exceeded.
When buying used, the usual Ducato chassis points apply – timing belt, brakes, corrosion on the floor pan – and with a long, light body the torsional stiffness and the condition of the mounting points matter particularly, as these must carry forces along the vehicle's full length under full load. Spare parts for the chassis are readily available, while parts for the special body are available only to a limited extent. With a light, long body, the roof skin and side panels are also worth checking, as these vibrate most across the vehicle's full length.
Sources: SpecCodex-Register: Kennwerte des Modells FIAT DUCATO
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,287 cm³correct |
Dimensions and weights
| Length | 7,250 mmcorrect |
|---|---|
| Width | 2,060 mmcorrect |
| Wheelbase | 4,040 mmcorrect |
| Unladen weight | 1,965 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 161 km/hcorrect |
Frequently asked questions
How much does the Fiat/kegger DUCATO weigh?
The unladen weight is 1,965 kg.
What is the gross vehicle weight of the Fiat/kegger DUCATO?
3,500 kg.
What engine does the Fiat/kegger DUCATO have?
4 cylinders, 2,287 cm³ displacement.
What are the dimensions of the Fiat/kegger DUCATO?
7,250 mm × 2,060 mm.
When was the Fiat/kegger DUCATO built?
Production years: 2021.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
