Ferguson TE20
Built: 1946-1956 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Built in 1946-1956, the Ferguson TE20 is a tractor from Ferguson. 19 kW is what the four-cylinder engine gets out of 2 litres.
Gearbox: manual. Dimensions are 2.92 m by 1.61 m. Unladen weight is 1,110 kg.
The engine is water-cooled. The predecessor was the Ford-Ferguson, the successor the Ferguson FE-35. Within the range, rated power spans from 17.5 to 37.5 kW; with 19 kW, the TE20 sits at the bottom end. Directly alongside are the TEA20 with 17.5 kW below and the FERGUSON with 19.4 kW above.
Technical data
Engine
| Engine make | Continental; standard; Perkinscorrect |
|---|---|
| Power | 25-32 hp (19 kW)correct |
| Cylinders | 4correct |
| Displacement | 1,966 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 2,920 mmcorrect |
|---|---|
| Width | 1,612.5 mmcorrect |
| Unladen weight | 1,110 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|---|
| Gearbox | manual gearboxcorrect |
| Gearbox make | Fergusoncorrect |
| Gears | 4correct |
Working data
| Linkage category | Fergusoncorrect |
|---|
Origin and approval
| Units built | ?correct |
|---|---|
| Predecessor | Ford-Fergusoncorrect |
| Successor | Ferguson FE-35correct |
Other data
| Front linkage | nocorrect |
|---|
Where this model stands
Power-to-weight ratio: 17.1 kW/t (19 kW / 1.1 t)
Power class: Compact (< 40 hp)
Stronger than 13% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Ferguson TE20 have?
The Ferguson TE20 delivers 19 kW.
How much does the Ferguson TE20 weigh?
The unladen weight is 1,110 kg.
What engine does the Ferguson TE20 have?
4 cylinders, 1,966 cm³ displacement.
What are the dimensions of the Ferguson TE20?
2,920 mm × 1,612 mm.
When was the Ferguson TE20 built?
Production years: 1946-1956.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 21 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.