Ferguson FE-35
Built: 1956-1958 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Ferguson FE-35 is a tractor built in 1956-1958. Under the bonnet works a four-cylinder engine displacing 2.3 litres, producing 26 kW.
Dimensions are 2.97 m by 1.63 m. Empty, it weighs 1,452 kg.
The engine is water-cooled. This model followed the Ferguson TO-35, before the Massey-Ferguson 35 took over. Within the range, rated power spans from 17.5 to 37.5 kW; with 26 kW, the FE-35 sits in the upper third. Directly alongside are the MASSEY FERGUSON with 24.6 kW below and the 35 SD with 27 kW above.
Technical data
Engine
| Power | 35 hp (26 kW)correct |
|---|---|
| Cylinders | 4correct |
| Displacement | 2,258 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 2,970 mmcorrect |
|---|---|
| Width | 1,630 mmcorrect |
| Unladen weight | 1,452 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|---|
| Gears | 6correct |
Origin and approval
| Plant | Coventry, Englandcorrect |
|---|---|
| Predecessor | Ferguson TO-35correct |
| Successor | Massey-Ferguson 35correct |
Where this model stands
Power-to-weight ratio: 17.9 kW/t (26 kW / 1.5 t)
Power class: Compact (< 40 hp)
Stronger than 22% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Ferguson FE-35 have?
The Ferguson FE-35 delivers 35 hp.
How much does the Ferguson FE-35 weigh?
The unladen weight is 1,452 kg.
What engine does the Ferguson FE-35 have?
4 cylinders, 2,258 cm³ displacement.
What are the dimensions of the Ferguson FE-35?
2,970 mm × 1,630 mm.
When was the Ferguson FE-35 built?
Production years: 1956-1958.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.