Fendt Xylon 520
Built: 1994–2004 · Series: Xylon
More machines from model year 1994
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fendt Xylon – the implement carrier from Marktoberdorf: Xylon 320 to 524 with front, mid and rear mounting, 77 to 92 kW, four- and six-cylinder engines of 4,580 to 6,128 cm³
The Fendt Xylon is a self-propelled implement carrier that Fendt built in the 1990s in Marktoberdorf to complement its classic farm tractors. On every Xylon model, the centrally or far-forward mounted cab gives a clear view of implements fitted at the front, between the axles and at the rear, so the machine can carry several tools at once; typical uses included grassland care, viticulture and municipal services. The model designations 320 and 520, 522 and 524 distinguish engine and equipment level, with four-cylinder engines in the smaller and six-cylinder engines in the larger versions.
Read on 3 more paragraphs
The register lists here 4 versions with 77 to 92 kW from four- and six-cylinder engines of 4,580 to 6,128 cm³, unladen weights from 5,480 to 5,950 kg, a gross weight of 12,500 kg, lengths from 4,816 to 5,415 mm, widths from 2,280 to 2,380 mm, heights from 2,950 to 3,110 mm and torque from 389 to 556 Nm.
As an implement carrier, the Xylon occupied a niche between a classic tractor and a special-purpose vehicle, competing with similar concepts from other makers in grassland and specialty-crop work; the layout allowed a more even weight distribution and a better view of the implements than a conventional tractor with front and rear mounting.
On a used buy, what counts is the condition of the mounting interfaces at the front, middle and rear, the tightness of the extra hydraulic circuits for multiple implement mounting, corrosion on the frame and cab mounts, and the availability of matching implements, since front, mid and rear mounting on the Xylon require different dimensions than on standard tractors; spare parts run through the Fendt dealer network.
Sources: SpecCodex register, model data: Fendt Xylon, Fendt (AGCO, Hersteller)
Technical data
Engine
| Engine | MAN D 0824 LUE 523, 4 cyl.correct |
|---|---|
| Fuel | dieselcorrect |
| Power | 105 hp (77 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Torque | 417 Nmcorrect |
| Cylinders | 4correct |
| Displacement | 4,580 cm³correct |
| Bore | 108 mmcorrect |
| Stroke | 125 mmcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 5,415 mmcorrect |
|---|---|
| Width | 2,280 mmcorrect |
| Height | 3,060 mmcorrect |
| Wheelbase | 3,105 mmcorrect |
| Ground clearance | 580 mmcorrect |
| Unladen weight | 5,620 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | Fendt Turboshift LS500 (44/44)correct |
| Front tyres | 480/70 R 30correct |
| Rear tyres | 480/70 R 38correct |
| Top speed | 50 km/hcorrect |
Working data
| Fuel tank capacity | 210 lcorrect |
|---|
Origin and approval
| Construction | Zentralholm mit Blockbauweisecorrect |
|---|---|
| Units built | 360correct |
Other data
| Linkage category | Cat IIIcorrect |
|---|---|
| PTO speed | 540/750/1000/1400 rpmcorrect |
Where this model stands
Power-to-weight ratio: 13.7 kW/t (77 kW / 5.6 t)
Power class: Large (100–180 hp)
Stronger than 69% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Fendt Xylon 520 have?
The Fendt Xylon 520 delivers 105 hp.
How much does the Fendt Xylon 520 weigh?
The unladen weight is 5,620 kg.
What engine does the Fendt Xylon 520 have?
4 cylinders, 4,580 cm³ displacement, Diesel.
How fast does the Fendt Xylon 520 go?
Top speed is 50 km/h.
What are the dimensions of the Fendt Xylon 520?
5,415 mm × 2,280 mm × 3,060 mm.
When was the Fendt Xylon 520 built?
Production years: 1994–2004.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 27 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.