Fendt FAVORIT 924
Series: Favorit
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fendt Favorit – Tractor Series Since 1958: Forerunner of Stepless Vario Technology, three- to six-cylinder diesels with 29.3 to 110 kW (40 to 150 hp), 2,976 to 6,240 cm³ displacement
Fendt introduced the Favorit name in 1958 with the Favorit 1 and developed the series over several decades. The recorded models span a wide power band: output from 29.3 to 110 kW, with models rated in horsepower from 40 to 150 hp, using three- to six-cylinder engines with displacement from 2,976 to 6,240 cm³.
Read on 3 more paragraphs
Recorded operating weight runs from 2,330 to 6,800 kg, wheelbase from 2,168 to 2,696 mm, and top speed of the listed models spans 20 to 30 km/h. In 1995 Fendt presented, in a Favorit model, the first production-ready stepless Vario transmission in tractor manufacturing – a technical milestone that still shapes the brand's model policy today.
Across many model years, the Favorit series occupied the upper-mid to premium segment of the Fendt line-up. When buying a used Favorit, distinguishing early mechanical model years from later Vario versions matters, since the operating concept and service demands differ fundamentally.
With a power range up to 110 kW, the Favorit series' three-point hitch spanned from category I on the smaller models to category II under ISO 730 at the upper end; the most powerful Favorit Vario versions already approached the class otherwise reserved for category III. Early Favorit model years before 1999 still ran without any EU emissions certification, while later Vario models already fell under the first European emissions stages.
Sources: SpecCodex register, model data: Fendt Favorit, Fendt
Technical data
Engine
| Torque | 985 Nmcorrect |
|---|
Working data
| Fuel tank capacity | 370 lcorrect |
|---|
Other data
| Linkage category | Cat IIIcorrect |
|---|---|
| PTO speed | 750/1000 rpmcorrect |
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 4 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
1 current listings for Fendt FAVORIT 924 on Hutnia.com.
View offers on Hutnia.com →
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
FAVORIT 512C
FAVORIT 515 C
FAVORIT 611LSA-FWA382S-4X4/2690
FAVORIT 612
FAVORIT 615LS
FAVORIT 716
FAVORIT 822
Favorit 1
Favorit 10 S/SA
Favorit 11 S/SA
Favorit 12 SA
Favorit 2
Sources: Latvian open data portal (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
