Fendt Fix 2 D
Built: 1963–1967 · Series: Fix-Reihe
More machines from model year 1963
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fendt Fix 2 D: air-cooled two-cylinder diesel compact tractor from the Fix series, 1,400 cc, 12.5 kW and 1,265 kg weight, built in the 1960s
Fendt is a German tractor manufacturer based in Marktoberdorf in the Allgäu region and has been part of the American AGCO corporation since 1997. In the 1960s the Fix series was one of the manufacturer's smaller lines, aimed at small farms that needed a simple, robust tractor without extensive extra equipment.
Read on 3 more paragraphs
The Fix 2 D is powered by an air-cooled two-cylinder diesel engine of 1,400 cc, producing 17 hp, or 12.5 kW, at 2,000 rpm. At a weight of 1,265 kg, a length of 2,890 mm, a height of 1,430 mm and a width of 1,520 mm, with a wheelbase of 1,750 mm, the machine is a compact small tractor whose top speed of 20 km/h was sufficient for field work.
Air cooling made the engine largely immune to frost and did away with coolant, a radiator and a water pump as possible sources of wear and leaks; in exchange, cooling performance under sustained full load is lower than with a water-cooled unit. A tractor of this size and output was built for light field work, hauling small trailers and running simple mounted implements, not for heavy tillage.
When buying such an old small tractor, the condition of the cooling fins on the cylinder block and of the cooling fan matters most, since dirt or damage there leads directly to overheating. Also worth checking are wear in the clutch and gearbox, the state of the brakes, and corrosion on sheet-metal parts and the frame; spare parts for such a small and old Fendt model are now only available from specialist suppliers.
Sources: SpecCodex-Register: Kennwerte des Modells Fendt Fix 2 D, Fendt (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 17 hp (12.5 kW)correct |
| Rated speed | 2,000 rpmcorrect |
| Cylinders | 2correct |
| Displacement | 1,400 cm³correct |
| Bore | 90 mmcorrect |
| Stroke | 110 mmcorrect |
| Compression ratio | 19correct |
| Injection pressure | 125 barcorrect |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 2,890 mmcorrect |
|---|---|
| Width | 1,520 mmcorrect |
| Height | 1,430 mmcorrect |
| Wheelbase | 1,750 mmcorrect |
| Ground clearance | 400 mmcorrect |
| Unladen weight | 1,265 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 6V / 2Rcorrect |
| Front tyres | 5, 00 - 16correct |
| Rear tyres | 8 - 28 (auf Wunsch: 10 - 24)correct |
| Top speed | 20 km/hcorrect |
Working data
| Fuel tank capacity | 30 lcorrect |
|---|
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|---|
| Units built | 2,507correct |
Where this model stands
Power-to-weight ratio: 9.9 kW/t (12 kW / 1.3 t)
Power class: Compact (< 40 hp)
Stronger than 5% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Fendt Fix 2 D have?
The Fendt Fix 2 D delivers 17 hp.
How much does the Fendt Fix 2 D weigh?
The unladen weight is 1,265 kg.
What engine does the Fendt Fix 2 D have?
2 cylinders, 1,400 cm³ displacement, Diesel.
How fast does the Fendt Fix 2 D go?
Top speed is 20 km/h.
What are the dimensions of the Fendt Fix 2 D?
2,890 mm × 1,520 mm × 1,430 mm.
When was the Fendt Fix 2 D built?
Production years: 1963–1967.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 26 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
