Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › Favorit 800 › Favorit 824

Fendt Favorit 824

Built: 1993–2004 · Series: Favorit 800

More machines from model year 1993

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Fendt Favorit 824 belongs to the Favorit 800 series. Production: 1993–2004. The engine delivers 230 hp (169 kW), has 6 cylinders, with a displacement of 6,871 cm³. Torque is 947 Nm. Rated speed is 2,300 rpm. The machine is 4,940 mm long, 2,590 mm wide and 3,110 mm high. The unladen weight is 7,800 kg. The wheelbase measures 2,840 mm. Top speed is 50 km/h. The tank holds 370 litres. Transmission: Turboshift (44/44). The linkage is category II/III. The Favorit 800 series covers 5 models and was built 1993–2004. Rated output within it ranges from 165 to 230 hp; the Favorit 824 sits at the top of that range with 230 hp. Its immediate neighbours are the Favorit 822 LSE below it with 210 hp. Unladen weight within it ranges from 7,480 to 7,800 kg; here the Favorit 824 sits at the top of that range with 7,800 kg. 1545 Fendt models across 89 series are on record.

Fendt Favorit 800 – large tractors from Marktoberdorf with six-cylinder engines around 6.87 litres, 121 to 169 kW, 7,480 to 7,800 kg unladen weight, models from 816 LSE to 824 LSE

The Fendt Favorit 800 is a range of large tractors that Fendt built in Marktoberdorf in the Allgäu; it comprises the 816 LSE, 818, 822 LSE, 824 and 824 LSE models, all with six-cylinder diesel engines of around 6.87 litres. The type numbers from 816 to 824 order the models by power class.

Read on 3 more paragraphs

The register lists 5 versions with 121 to 169 kW (190 to 230 hp) from six-cylinder engines of 6,870 to 6,871 cm³, unladen weights of 7,480 to 7,800 kg, a length of 4,940 mm, widths of 2,550 to 2,590 mm, heights of 3,045 to 3,110 mm and torque of 709 to 947 Nm at 2,200 to 2,300 rpm.

In the 1990s, the Favorit 800 occupied Fendt's upper power segment for large farms and contractors, before the Vario continuously variable transmissions of later ranges brought stepless power transfer to this class; it competed with comparable large tractors from Fiat, Deutz-Fahr and John Deere. The robust mechanical drivetrain without complex transmission electronics is still valued today by collectors and farms with simple workshop facilities.

On a used Favorit 800, check the clutch and gearbox, the hydraulic pump and lift linkage, and rust on the fenders and cab floor; the six-cylinder engines call for attention to the injection pump and turbocharger, with parts available through specialist Fendt dealers and tractor parts suppliers.

Sources: SpecCodex register, model data: Fendt Favorit 800, Fendt (AGCO, Hersteller)

Technical data

Engine

EngineMAN D 0826 LE 523, 6 cyl.correct
Power230 hp (169 kW)correct
Rated speed2,300 rpmcorrect
Torque947 Nmcorrect
Cylinders6correct
Displacement6,871 cm³correct

Dimensions and weights

Length4,940 mmcorrect
Width2,590 mmcorrect
Height3,110 mmcorrect
Wheelbase2,840 mmcorrect
Unladen weight7,800 kgcorrect

Drivetrain and chassis

GearboxTurboshift (44/44)correct
Top speed50 km/hcorrect

Working data

Fuel tank capacity370 lcorrect

Other data

Linkage categoryCat II/IIIcorrect

Where this model stands

Power-to-weight ratio: 21.7 kW/t (169 kW / 7.8 t)

Power class: Heavy (> 180 hp)

Stronger than 94% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt Favorit 824 have?

The Fendt Favorit 824 delivers 230 hp.

How much does the Fendt Favorit 824 weigh?

The unladen weight is 7,800 kg.

What engine does the Fendt Favorit 824 have?

6 cylinders, 6,871 cm³ displacement.

How fast does the Fendt Favorit 824 go?

Top speed is 50 km/h.

What are the dimensions of the Fendt Favorit 824?

4,940 mm × 2,590 mm × 3,110 mm.

When was the Fendt Favorit 824 built?

Production years: 1993–2004.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Used equipment offers
1 current listings for Fendt Favorit 824 on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Latvian open data portal (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare