Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › Farmer › Farmer 3 S

Fendt Farmer 3 S

Built: 1966–1972 · Series: Farmer

More machines from model year 1966

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Farmer 3 S from Fendt is part of the Farmer series. Production: 1966–1972. The engine delivers 45 hp (33 kW), has 4 cylinders, with a displacement of 2,976 cm³. The machine is 3,675 mm long, 1,904 mm wide and 1,720 mm high. The unladen weight is 2,345 kg. The wheelbase measures 2,253 mm. Ground clearance is 410 mm. Top speed is 30 km/h. Transmission: 17(21)/5. The engine is water-cooled. Tyres: front 6.5 - 20ASF, rear 11 - 36 AS. The fuel is diesel. Construction: unit construction (no separate frame). The PTO runs at 540/1000 rpm. Around 14.156 units were built. The Farmer series covers 34 models. Rated output within it ranges from 25 to 55 hp; the Farmer 3 S sits in the upper part of that range with 45 hp. Its immediate neighbours are the Farmer 1 D below it with 34 hp and the Farmer 4 S/SA above it with 55 hp. Unladen weight within it ranges from 1,500 to 2,455 kg; here the Farmer 3 S sits at the top of that range with 2,345 kg. 1545 Fendt models across 89 series are on record.

Fendt Farmer – Base Name Spanning Several Decades, 1963 Into the 2000s: two- to four-cylinder diesels with 18.3 to 82 kW, 1,700 to 4,314 cm³ displacement, air- and water-cooled

Fendt used the name Farmer as a base designation for tractors across several decades, documented in the register from the 1Z in 1963 to Farmer models from 2009. Output of the recorded models ranges from 18.3 to 82 kW, using two- to four-cylinder engines with displacement from 1,700 to 4,314 cm³.

Read on 3 more paragraphs

Recorded operating weight runs from 1,500 to 4,850 kg, wheelbase from 1,775 to 2,333 mm, and top speed of the listed models spans 19.6 to 40 km/h. This wide spread reflects the fact that both early post-war models and modern cabbed tractors with higher travel speeds carried the Farmer name.

At Fendt, the Farmer name consistently denoted the mid power class between the more compact models and the large Favorit tractors. For a used Farmer tractor, the exact generation matters most, as technology and equipment changed fundamentally over this long span.

The two-speed PTO with 540 and 1,000 rpm only became widespread in Europe from the 1970s; early 1960s Farmer models therefore usually had only the single-speed 540 rpm PTO, while later model years offered both speeds. The three-point hitch matched category I at the lower end of the power range and already category II under ISO 730 at the upper end above 55 kW. The exact category therefore follows from the model year rather than the power rating alone, since Fendt introduced the change model by model.

Sources: SpecCodex register, model data: Fendt Farmer, Fendt

Technical data

Engine

Fueldieselcorrect
Power45 hp (33 kW)correct
Cylinders4correct
Displacement2,976 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,675 mmcorrect
Width1,904 mmcorrect
Height1,720 mmcorrect
Wheelbase2,253 mmcorrect
Ground clearance410 mmcorrect
Unladen weight2,345 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox17(21)/5correct
Front tyres6.5 - 20ASFcorrect
Rear tyres11 - 36 AScorrect
Top speed30 km/hcorrect

Origin and approval

Constructionunit construction (no separate frame)correct
Units built14,156correct

Other data

PTO speed540/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 14.1 kW/t (33 kW / 2.3 t)

Power class: Universal (40–100 hp)

Stronger than 29% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt Farmer 3 S have?

The Fendt Farmer 3 S delivers 45 hp.

How much does the Fendt Farmer 3 S weigh?

The unladen weight is 2,345 kg.

What engine does the Fendt Farmer 3 S have?

4 cylinders, 2,976 cm³ displacement, Diesel.

How fast does the Fendt Farmer 3 S go?

Top speed is 30 km/h.

What are the dimensions of the Fendt Farmer 3 S?

3,675 mm × 1,904 mm × 1,720 mm.

When was the Fendt Farmer 3 S built?

Production years: 1966–1972.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare