Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › Farmer 2S

Fendt Farmer 2S

Built: 1968–1972 · Series: Farmer 2S

More machines from model year 1968

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the Farmer 2S, Fendt offers a model from the Farmer 2S series. Production: 1968–1972. The engine delivers 42 hp (30.5 kW), has 3 cylinders, with a displacement of 2,233 cm³. Rated speed is 2,480 rpm. The machine is 3,625 mm long. The unladen weight is 2,225 kg. The tank holds 65 litres. Transmission: 13 biegów w przód / 4 wstecz. The linkage is category I. The PTO runs at 540/1000 rpm. Rated output across the Fendt range ranges from 4 to 553 hp; the Farmer 2S sits at the bottom of that range with 42 hp. Its immediate neighbours are the Favorit 1 below it with 40 hp and the Farmer 3S above it with 45 hp. Rated output across the Fendt range ranges from 9 to 540 hp; here the Farmer 2S sits at the bottom of that range with 42 hp. 1545 Fendt models across 89 series are on record.

Fendt Farmer 2S/2SA – the small Farmer range from Marktoberdorf of the 1960s: three-cylinder diesel with 30.5 kW/42 hp, 2,233 cm³ displacement and 2,225 to 2,510 kg unladen weight

Fendt was founded in 1930 by Xaver Fendt in Marktoberdorf in the Allgäu and built its first own diesel tractors there in the 1930s under the name Dieselross; from the late 1950s this grew into the Farmer range with an enclosed, styled sheet-metal body. The Farmer 2S belongs to the small to mid-size class of this Farmer 2 generation of the 1960s; the A in the Farmer 2SA version has consistently marked four-wheel drive at Fendt since that time.

Read on 3 more paragraphs

The register lists here 2 versions with 30.5 kW or 42 hp from a three-cylinder of 2,233 cm³ displacement, unladen weights from 2,225 to 2,510 kg, a length of 3,625 mm and a rated speed of 2,480 rpm.

Marktoberdorf was and is Fendt's home plant and remains the group's tractor-production site to this day; the Farmer range of the 1960s formed the backbone of the Bavarian family firm in the West German market for small and mid-size farms, before Fendt moved upmarket in the 1970s with the Favorit range.

On these early Farmer tractors, condition of the sheet-metal body and mudguards for rust, condition of injection pump, starter and alternator, tightness of the mechanical steering and the clutch count when buying used; parts run through dealers specialising in Fendt classics, since Fendt's regular parts service no longer carries the Farmer 2 range.

Sources: SpecCodex register, model data: Fendt Farmer 2S, Fendt (AGCO, Hersteller)

Technical data

Engine

EngineMWM D208-3, 3 cyl.correct
Power42 hp (30.5 kW)correct
Rated speed2,480 rpmcorrect
Cylinders3correct
Displacement2,233 cm³correct

Dimensions and weights

Length3,625 mmcorrect
Unladen weight2,225 kgcorrect

Drivetrain and chassis

Gearbox13 forward speeds / 4 reversecorrect

Working data

Fuel tank capacity65 lcorrect

Other data

Linkage categoryCat Icorrect
PTO speed540/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 13.7 kW/t (30 kW / 2.2 t)

Power class: Universal (40–100 hp)

Stronger than 27% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt Farmer 2S have?

The Fendt Farmer 2S delivers 42 hp.

How much does the Fendt Farmer 2S weigh?

The unladen weight is 2,225 kg.

What engine does the Fendt Farmer 2S have?

3 cylinders, 2,233 cm³ displacement.

When was the Fendt Farmer 2S built?

Production years: 1968–1972.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare