Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › Farmer 280 VA

Fendt Farmer 280 VA

Built: 1996–2002 · Series: Farmer 200

More machines from model year 1996

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Farmer 280 VA from Fendt is part of the Farmer 200 series. Production: 1996–2002. The engine delivers 80 hp (59 kW), has 4 cylinders, with a displacement of 4,086 cm³. Torque is 272 Nm. Rated speed is 2,400 rpm. The machine is 3,520 mm long, 1,172 mm wide and 2,180 mm high. The unladen weight is 2,270 kg. The wheelbase measures 2,099 mm. Ground clearance is 222 mm. Top speed is 40 km/h. Transmission: 21V/6R. The engine is air-cooled. Tyres: front 10.0/75-15.3, rear 12.4 R 24. The fuel is diesel. The bore measures 102 mm. The stroke is 125 mm. The compression ratio is 19:1. Maximum torque is reached at 1,600 rpm. Injection pressure is 185 bar. The linkage is category II. The PTO runs at 540/750 rpm. Around 1856 units were built. The Farmer 200 series covers 15 models. Rated output within it ranges from 35 to 80 hp; the Farmer 280 VA sits at the top of that range with 80 hp. Its immediate neighbours are the Farmer 275 V/VA below it with 75 hp. Unladen weight within it ranges from 1,550 to 2,520 kg; here the Farmer 280 VA sits in the upper part of that range with 2,270 kg. 1545 Fendt models across 89 series are on record.

Fendt Farmer 200 — narrow-track for vineyards, orchards and plantations

The Farmer 200 range was not built for open fields but for the row: narrow-track tractors for viticulture, orchards and plantations. Fendt began in 1974 with a concept still carried on today — narrow enough to work between vine rows, yet fully equipped.

Read on 3 more paragraphs

The letters after the number say what the tractor was built for. V stands for viticulture: particularly narrow and low. P stands for plantations — the most striking example is the 203 P, which stands just 1,340 mm tall, lower than many a small car. A trailing A means four-wheel drive. When comparing offers it is therefore worth reading the letter first, not the number.

The range spans two generations. Farmer 200 and 203 ran from 1974 to 1982 with air-cooled three-cylinder engines of 38 and 50 hp respectively. The later 260 and 270 arrived in 1988 and ran until 2001 and 2002, with 60 and 70 hp from the same basic concept.

Production figures are modest and explain today's used market: 1,048 Farmer 200s were built with rear-wheel drive and 975 with all-wheel drive, then 948 and 1,689 of the 203, around 1,345 of the 260 and roughly 2,475 of the 270. These are runs of a few thousand machines — well-kept examples hold their value accordingly.

Sources: Traktorenlexikon (Wikibooks), Traktorenlexikon: 203 V/VA (Wikibooks), FENDTfan Typenverzeichnis

Technical data

Engine

Fueldieselcorrect
Power80 hp (59 kW)correct
Rated speed2,400 rpmcorrect
Torque272 Nmcorrect
Speed at max. torque1,600 rpmcorrect
Cylinders4correct
Displacement4,086 cm³correct
Bore102 mmcorrect
Stroke125 mmcorrect
Compression ratio19correct
Injection pressure185 barcorrect
Coolingair-cooledcorrect

Dimensions and weights

Length3,520 mmcorrect
Width1,172 mmcorrect
Height2,180 mmcorrect
Wheelbase2,099 mmcorrect
Ground clearance222 mmcorrect
Unladen weight2,270 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox21V/6Rcorrect
Front tyres10.0/75-15.3correct
Rear tyres12.4 R 24correct
Top speed40 km/hcorrect

Origin and approval

Units built1,856correct

Other data

Linkage categoryCat IIcorrect
PTO speed540/750 rpmcorrect

Where this model stands

Power-to-weight ratio: 26 kW/t (59 kW / 2.3 t)

Power class: Universal (40–100 hp)

Stronger than 55% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt Farmer 280 VA have?

The Fendt Farmer 280 VA delivers 80 hp.

How much does the Fendt Farmer 280 VA weigh?

The unladen weight is 2,270 kg.

What engine does the Fendt Farmer 280 VA have?

4 cylinders, 4,086 cm³ displacement, Diesel.

How fast does the Fendt Farmer 280 VA go?

Top speed is 40 km/h.

What are the dimensions of the Fendt Farmer 280 VA?

3,520 mm × 1,172 mm × 2,180 mm.

When was the Fendt Farmer 280 VA built?

Production years: 1996–2002.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 28 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare