Fendt Farmer 2 DE
Built: 1968–1971 · Series: Farmer (2)
More machines from model year 1968
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fendt Farmer 2 – compact tractor from the 1960s from the Allgäu: three-cylinder diesel up to 2,233 cm3, 25 to 30.5 kW, DE, E and S variants
The Farmer 2 belonged in the 1960s to the lower class of the Fendt Farmer range and was offered in the Farmer 2, Farmer 2 DE, Farmer 2 E and Farmer 2 S variants, which differed in equipment and drivetrain details. Over the decades, the Farmer name stood at Fendt for the mid and lower power class of the brand's conventional field tractors.
Read on 3 more paragraphs
The register lists here four versions with 25 to 30.5 kW (35 to 42 hp) from three-cylinder engines of 2,004 to 2,233 cm3 displacement. Unladen weight ranges from 1,735 to 2,225 kg, overall length from 3,264 to 3,625 mm, width from 1,558 to 1,710 mm and height from 1,507 to 1,660 mm. Rated speed sits between 2,100 and 2,600 rpm.
As a compact tractor in the 35 to 42 hp range, the Farmer 2 targeted smaller and mid-sized farms looking for an agile, versatile three-cylinder tractor for fieldwork, yard duties and light transport tasks, without the investment in the larger Farmer models.
On these historic Fendt tractors, what counts is rust on the frame, mudguards and bonnet, the condition of the clutch and gearbox, the tightness of the hydraulics and lift linkage, and the function of the lighting system and instruments. Spare parts for the engine and gearbox are today available mainly through specialist Fendt vintage-tractor dealers and Fendt clubs.
Sources: SpecCodex register, model data: Fendt Farmer 2, Fendt (AGCO, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 35 hp (25.6 kW)correct |
| Rated speed | 2,100 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 2,233 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,264 mmcorrect |
|---|---|
| Width | 1,558 mmcorrect |
| Height | 1,537 mmcorrect |
| Wheelbase | 1,968 mmcorrect |
| Ground clearance | 405 mmcorrect |
| Unladen weight | 1,820 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 8/4-Halbsynchrongetriebecorrect |
| Forward gears | 8correct |
| Reverse gears | 4correct |
| Front tyres | 5.50-16, 6.00-16correct |
| Rear tyres | 10-28, 11, 2-28, 9-32, 9, 5-32, 11-28, 12, 4-28correct |
| Top speed | 19.7 km/hcorrect |
Working data
| Fuel tank capacity | 40 lcorrect |
|---|
Origin and approval
| Construction | frameless unit constructioncorrect |
|---|---|
| Units built | 5,188correct |
Other data
| Linkage category | Cat Icorrect |
|---|---|
| PTO speed | 553/1106 rpmcorrect |
Where this model stands
Power-to-weight ratio: 14.1 kW/t (26 kW / 1.8 t)
Power class: Compact (< 40 hp)
Stronger than 20% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Fendt Farmer 2 DE have?
The Fendt Farmer 2 DE delivers 35 hp.
How much does the Fendt Farmer 2 DE weigh?
The unladen weight is 1,820 kg.
What engine does the Fendt Farmer 2 DE have?
3 cylinders, 2,233 cm³ displacement, Diesel.
How fast does the Fendt Farmer 2 DE go?
Top speed is 19.7 km/h.
What are the dimensions of the Fendt Farmer 2 DE?
3,264 mm × 1,558 mm × 1,537 mm.
When was the Fendt Farmer 2 DE built?
Production years: 1968–1971.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 26 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.