Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › 200 S series › 208 S

Fendt 208 S – specifications

Built: 2003–2009 · Series: 200er-S-Reihe

The 200er-S-Reihe series from Fendt includes the 208 S. Production: 2003–2009. The engine delivers 80 hp (59 kW), has 4 cylinders, with a displacement of 4,314 cm³. Torque is 339 Nm. Rated speed is 2,300 rpm. The machine is 3,695 mm long, 1,963 mm wide and 2,515 mm high. The unladen weight is 3,220 kg. The wheelbase measures 2,232 mm. Ground clearance is 395 mm. Top speed is 40 km/h. The tank holds 71 litres. Transmission: 21V/6R auf Wunsch: 21/21 shuttle transmission. The engine is air-cooled. Tyres: front 320/80 R 20, rear 420/85 R 30. The fuel is Diesel/RME. The bore measures 102 mm. The stroke is 132 mm. The compression ratio is 18:1. Maximum torque is reached at 1,500 rpm. Construction: unit construction (no separate frame). Injection pressure is 1000 bar. The linkage is category II. The PTO runs at 540/750/1000 rpm. Rated output across the Fendt range ranges from 4 to 553 hp; the 208 S sits at the bottom of that range with 80 hp. Its immediate neighbours are the Farmer 308 LSA Turbomatik below it with 78 hp and the 208 PA above it with 80.3 hp. Rated output across the Fendt range ranges from 9 to 540 hp; here the 208 S sits at the bottom of that range with 80 hp. 1545 Fendt models across 89 series are on record.

Data for the version built 2003–2009 · Data origin: Reference work (Wikipedia/Wikibooks) · sources

More machines from model year 2003

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Fendt 208 S (200er-S range, 2003–2009): air-cooled four-cylinder diesel with 4,314 cm³, 59 kW, 339 Nm of torque and a weight of 3,220 kg

The 200er-S range rounded out Fendt's line-up, built in Marktoberdorf, Bavaria, within the AGCO group, with more simply built standard tractors alongside the Vario ranges with a stepless transmission. The 208 S was built from 2003 to 2009.

Read on 3 more paragraphs

The Fendt 208 S carries an air-cooled four-cylinder diesel engine with 4,314 cm³ of displacement, producing 80 hp, or 59 kW, at 2,300 rpm, with 339 Nm of torque; it runs on diesel or RME. At 3,220 kg, 3,695 mm long, 2,515 mm high, 1,963 mm wide and with a 2,232 mm wheelbase, the machine reaches a top speed of 40 km/h.

Air cooling, rarer at Fendt than the usual water cooling and more often associated with makers such as Deutz or Hatz, does without coolant, a radiator or a water pump, making it immune to frost damage in the cooling system. At 59 kW and with a conventional gearbox, the 208 S suits field work with medium-weight implements and haulage runs on the farm. The 40 km/h design top speed falls under German driving licence class T.

When buying an air-cooled engine used, the condition of the cooling fins on the cylinder block matters, which should be free of dirt and damage, along with a working oil cooler, which plays a bigger role with air cooling than with water cooling. Also worth checking are the condition of the clutch, the tightness of the hydraulic connections for implements, and corrosion damage to the frame and mudguards.

Sources: SpecCodex-Register: Kennwerte des Modells Fendt 208 S, Fendt (manufacturer)

Technical data

Engine

FuelDiesel/RMEcorrect
Power80 hp (59 kW)correct
Rated speed2,300 rpmcorrect
Torque339 Nmcorrect
Speed at max. torque1,500 rpmcorrect
Cylinders4correct
Displacement4,314 cm³correct
Bore102 mmcorrect
Stroke132 mmcorrect
Compression ratio18correct
Injection pressure1,000 barcorrect
Coolingair-cooledcorrect

Dimensions and weights

Length3,695 mmcorrect
Width1,963 mmcorrect
Height2,515 mmcorrect
Wheelbase2,232 mmcorrect
Ground clearance395 mmcorrect
Unladen weight3,220 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox21V/6R auf Wunsch: 21/21 shuttle transmissioncorrect
Front tyres320/80 R 20correct
Rear tyres420/85 R 30correct
Top speed40 km/hcorrect

Working data

Fuel tank capacity71 lcorrect

Origin and approval

Constructionunit construction (no separate frame)correct

Other data

Linkage categoryCat IIcorrect
PTO speed540/750/1000 rpmcorrect

Frequently asked questions

How much power does the Fendt 208 S have?

The Fendt 208 S delivers 80 hp.

How much does the Fendt 208 S weigh?

The unladen weight of the Fendt 208 S is 3,220 kg.

What engine does the Fendt 208 S have?

The Fendt 208 S has 4 cylinders and 4,314 cm³ displacement. Fuel: Diesel/RME.

How fast does the Fendt 208 S go?

The top speed of the Fendt 208 S is 40 km/h.

What are the dimensions of the Fendt 208 S?

Dimensions of the Fendt 208 S: length 3,695 mm, width 1,963 mm, height 2,515 mm.

When was the Fendt 208 S built?

The Fendt 208 S was built from 2003 to 2009.

Where this model stands

Power-to-weight ratio: 18.3 kW/t (59 kW / 3.2 t)

Power class: Universal (40–100 hp)

Stronger than 55% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 29 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​​​​‌⁠‌⁠‍‍‌⁠‌⁠‍​‌​‍‍

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare