Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Farmer › F-7258TE

Farmer F-7258TE

Built: Year not documented · Series: TE

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The F-7258TE from Farmer is part of the TE series. The engine delivers 76 hp (56 kW), has 4 cylinders, with a displacement of 4,520 cm³. The machine is 4,050 mm long, 1,966 mm wide and 2,640 mm high. The unladen weight is 3,740 kg. Ground clearance is 470 mm. The tank holds 125 litres. Tyres: front 320/70 R24, rear 16,9 R30. The fuel is diesel. Rated output across the Farmer range ranges from 61 to 105 hp; the F-7258TE sits in the lower part of that range with 76 hp. Its immediate neighbours are the F4-7258 below it with 66 hp and the F2-8248 above it with 80 hp. Rated output across the Farmer range ranges from 61 to 105 hp; here the F-7258TE sits in the lower part of that range with 76 hp. 11 Farmer models across 2 series are on record.

Farmer TE – the F-7258TE and F-9258TE range: shared chassis, four-cylinder diesel of 4,520 cm³, 56 to 63 kW, unladen weight 3,740 kg

The Farmer TE range comprises two types, the F-7258TE and F-9258TE, which share an identical chassis, the same displacement and the same unladen weight and differ only in engine output. The range thus follows the common tractor-building principle of offering one base model in several power stages rather than developing a separate chassis for each power class.

Read on 3 more paragraphs

The register lists here 2 versions with 56 to 63 kW (76 to 86 hp) from four-cylinder diesel engines of 4,520 cm³ displacement, with an unladen weight of 3,740 kg, a length of 4,050 mm, a width of 1,966 mm and a height of 2,640 mm.

With around 60 to 85 hp and an unladen weight of nearly 3.7 tonnes, the Farmer TE range counts among the medium-sized all-purpose tractors for arable and grassland farms, where the power spread between the two types serves different drawbar demands within the same chassis. Their range of use spanned tillage with ploughs and cultivators to driving loader wagons and slurry tankers, typical for all-purpose tractors of this power class.

When buying used, check the condition and operating hours of the diesel engine, rust on the chassis and mudguards, the condition of the clutch and gearbox, and the tightness of the hydraulics and PTO. The condition of tyres, cab and lighting is also worth checking closely, as spares for these are not always readily available. Parts availability for this range depends heavily on the local dealer.

Sources: SpecCodex register, model data: Farmer TE

Technical data

Engine

Fueldieselcorrect
Power76 hp (56 kW)correct
Cylinders4correct
Displacement4,520 cm³correct

Dimensions and weights

Length4,050 mmcorrect
Width1,966 mmcorrect
Height2,640 mmcorrect
Ground clearance470 mmcorrect
Unladen weight3,740 kgcorrect

Drivetrain and chassis

Front tyres320/70 R24correct
Rear tyres16, 9 R30correct

Working data

Fuel tank capacity125 lcorrect

Where this model stands

Power-to-weight ratio: 15 kW/t (56 kW / 3.7 t)

Power class: Universal (40–100 hp)

Stronger than 53% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Farmer F-7258TE have?

The Farmer F-7258TE delivers 76 hp.

How much does the Farmer F-7258TE weigh?

The unladen weight is 3,740 kg.

What engine does the Farmer F-7258TE have?

4 cylinders, 4,520 cm³ displacement, Diesel.

What are the dimensions of the Farmer F-7258TE?

4,050 mm × 1,966 mm × 2,640 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare