Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Eicher › Kombi G 40

Eicher Kombi G 40

Built: 1964–1966 · Series: Kombi G

More machines from model year 1964

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Eicher Kombi G 40 belongs to the Kombi G series. Production: 1964–1966. The engine delivers 40 hp (29.3 kW), has 3 cylinders, with a displacement of 2,944 cm³. The machine is 5,020 mm long, 1,640 mm wide and 1,700 mm high. The unladen weight is 2,020 kg. The wheelbase measures 2,940 mm. Top speed is 20 km/h. Tyres: front 6.00 - 16, rear 9 - 36. The fuel is diesel. Construction: semi-frame construction. The gearbox offers 8 forward gears. There are also 4 reverse gears. Around 239 units were built. The Kombi G series covers 6 models. Rated output within it ranges from 20 to 40 hp; the Kombi G 40 sits at the top of that range with 40 hp. Its immediate neighbours are the Kombi G 30 below it with 30 hp. Unladen weight within it ranges from 1,400 to 2,020 kg; here the Kombi G 40 sits at the top of that range with 2,020 kg. 196 Eicher models across 41 series are on record.

Eicher Kombi G – light general-purpose tractors from Forstern: Kombi G 25 to Kombi G 280, two- and three-cylinder diesels rated 15–29 kW, 1,400–2,020 kg

The Kombi G is an early line of light general-purpose tractors from Eicher of Forstern, with type designations from Kombi G 25 to Kombi G 280. The line targeted smaller farms needing a versatile, compact tractor for field and yard work, powered by two- and three-cylinder diesel engines.

Read on 3 more paragraphs

The register lists 6 versions rated at 14.6 to 29.3 kW (20 to 40 hp) from two- to three-cylinder diesel engines of 1,700 to 2,944 cm³, torque of 110 Nm at around 2,000 rpm, a lift capacity of up to 850 kg, kerb weights of 1,400 to 2,020 kg, and a length of 3,880 to 5,020 mm, a width of 1,580 to 1,645 mm and a height of 1,470 to 1,770 mm.

As light general-purpose tractors of the post-war era, the Kombi G models competed with comparable small tractors from other German makers and served the market of smaller, often still mixed-farming holdings in southern Germany, where field work, yard tasks and transport were all handled by the same tractor.

On these vintage tractors, check engine and radiator condition, the clutch and mechanical gearbox, the simple hydraulics with lift, and corrosion on sheet-metal parts, wings and the frame; steering and brakes also belong on any test drive. Spares are now only available through specialist Eicher parts dealers, vintage-machinery markets and reproductions of common wear parts.

Sources: SpecCodex register, model data: Eicher Kombi G

Technical data

Engine

Fueldieselcorrect
Power40 hp (29.3 kW)correct
Cylinders3correct
Displacement2,944 cm³correct

Dimensions and weights

Length5,020 mmcorrect
Width1,640 mmcorrect
Height1,700 mmcorrect
Wheelbase2,940 mmcorrect
Unladen weight2,020 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox8/4-Getriebecorrect
Forward gears8correct
Reverse gears4correct
Front tyres6.00 - 16correct
Rear tyres9 - 36correct
Top speed20 km/hcorrect

Origin and approval

Constructionsemi-frame constructioncorrect
Units built239correct

Where this model stands

Power-to-weight ratio: 14.5 kW/t (29 kW / 2 t)

Power class: Compact (< 40 hp)

Stronger than 25% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Eicher Kombi G 40 have?

The Eicher Kombi G 40 delivers 40 hp.

How much does the Eicher Kombi G 40 weigh?

The unladen weight is 2,020 kg.

What engine does the Eicher Kombi G 40 have?

3 cylinders, 2,944 cm³ displacement, Diesel.

How fast does the Eicher Kombi G 40 go?

Top speed is 20 km/h.

What are the dimensions of the Eicher Kombi G 40?

5,020 mm × 1,640 mm × 1,700 mm.

When was the Eicher Kombi G 40 built?

Production years: 1964–1966.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare