Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Eicher › 3001

Eicher 3001

Built: 1966–1969 · Series: HR

More machines from model year 1966

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Eicher 3001 is a model in the HR series. Production: 1966–1969. The engine delivers 54 hp (40 kW), has 4 cylinders, with a displacement of 3,927 cm³. Rated speed is 2,000 rpm. The machine is 3,570 mm long, 1,900 mm wide and 1,650 mm high. The unladen weight is 2,675 kg. The wheelbase measures 2,396 mm. Top speed is 20 km/h. Transmission: Hydrostat. The engine is air-cooled. Tyres: front 6.5-20, rear 14-30. The fuel is diesel. Construction: Block. Around 25 units were built. Rated output across the Eicher range ranges from 11 to 145 hp; the 3001 sits in the lower part of that range with 54 hp. Its immediate neighbours are the 3712A-74 below it with 52 hp and the Mammut 3354 above it with 55 hp. Rated output across the Eicher range ranges from 8 to 106.1 kW; here the 3001 sits in the lower part of that range with 40 kW. 196 Eicher models across 41 series are on record.

Eicher 3001 (HR range, 1966–1969): air-cooled four-cylinder diesel with 3,927 cm³, 40 kW at 2,000 rpm and a 20 km/h top speed

In the HR range, Eicher, the Bavarian tractor manufacturer, built versions with an air-cooled four-cylinder engine. The 3001 was built from 1966 to 1969. The HR range thus rounded out Eicher's mid power segment with a smoothly running four-cylinder alternative to the common two- and three-cylinder models.

Read on 3 more paragraphs

The Eicher 3001 carries an air-cooled four-cylinder diesel engine with 3,927 cm³ of displacement, producing 54 hp, or 40 kW, at 2,000 rpm. At 2,675 kg, 3,570 mm long, 1,650 mm high, 1,900 mm wide and with a 2,396 mm wheelbase, the machine reaches a top speed of 20 km/h.

With four air-cooled cylinders and 3,927 cm³ of displacement, the 3001 produces 40 kW at a comparatively low 2,000 rpm and runs more smoothly than smaller two- or three-cylinder engines of the same power class. The machine was built for field work with medium-weight implements and for haulage on medium-sized farms. The comparatively long 2,396 mm wheelbase gave the tractor stable straight-line running during haulage runs.

When buying an air-cooled four-cylinder engine of this age used, the condition of the cooling fan and cooling fins on all four cylinders matters, as uneven cooling airflow can lead to heat damage on individual cylinders. Also worth checking are the injection pump, the condition of the clutch, and corrosion damage to the frame and mudguards.

Sources: SpecCodex-Register: Kennwerte des Modells Eicher 3001, Eicher (Wikipedia)

Technical data

Engine

Fueldieselcorrect
Power54 hp (40 kW)correct
Rated speed2,000 rpmcorrect
Cylinders4correct
Displacement3,927 cm³correct
Coolingair-cooledcorrect

Dimensions and weights

Length3,570 mmcorrect
Width1,900 mmcorrect
Height1,650 mmcorrect
Wheelbase2,396 mmcorrect
Unladen weight2,675 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
GearboxHydrostatcorrect
Front tyres6.5-20correct
Rear tyres14-30correct
Top speed20 km/hcorrect

Origin and approval

ConstructionBlockcorrect
Units built25correct

Where this model stands

Power-to-weight ratio: 15 kW/t (40 kW / 2.7 t)

Power class: Universal (40–100 hp)

Stronger than 37% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Eicher 3001 have?

The Eicher 3001 delivers 54 hp.

How much does the Eicher 3001 weigh?

The unladen weight is 2,675 kg.

What engine does the Eicher 3001 have?

4 cylinders, 3,927 cm³ displacement, Diesel.

How fast does the Eicher 3001 go?

Top speed is 20 km/h.

What are the dimensions of the Eicher 3001?

3,570 mm × 1,900 mm × 1,650 mm.

When was the Eicher 3001 built?

Production years: 1966–1969.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare