Eicher Muli G 13
Built: 1956–1958 · Series: G
More machines from model year 1956
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Eicher G – the small Forstern tractors Kombi and Muli: single-cylinder diesel, 9.5 to 11.7 kW, 667 to 981 cm³, unladen weight 1,095 to 1,200 kg
Eicher was a Bavarian agricultural machinery maker based in Forstern near Munich, and under the G range built small, manoeuvrable tractors for part-time farms, specialty crops and steep terrain. The Kombi G 160 and Muli G 13 represent two type lines within the G range: Kombi denoted combined use as a tug and implement carrier, Muli the even more compact, load-carrier-like versions for narrow paths and vineyards. Both carry single-cylinder diesel engines and mark the lower end of Eicher's model range.
Read on 3 more paragraphs
The register lists here 2 versions with 9.5 to 11.7 kW (13 to 16 hp) from single-cylinder engines of 667 to 981 cm³ displacement, with unladen weights from 1,095 to 1,200 kg, lengths from 3,085 to 3,600 mm, widths from 1,480 to 1,680 mm and heights from 1,250 to 1,470 mm.
As the smallest range in the Eicher line-up, the Kombi and Muli occupied the niche between a single-axle walking tractor and a standard tractor: light enough for hillside plots and orchards, yet fitted with a full three-point hydraulic linkage and PTO for mowers, trailers and tillers. They competed with comparable small tractors from Holder and Fendt of the same period, though they remained considerably rarer in the field.
When buying used, check the condition of the single-cylinder engine including cold-start behaviour and compression, rust on body panels and mudguards, the condition of the steering and front-axle bearings, and the tightness of the hydraulics and PTO. Spares come through specialist Eicher dealers and tractor clubs; new parts are no longer available from the maker.
Sources: SpecCodex register, model data: Eicher G
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 13 hp (9.5 kW)correct |
| Rated speed | 2,600 rpmcorrect |
| Torque | 36.3 Nmcorrect |
| Cylinders | 1correct |
| Displacement | 667 cm³correct |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 3,085 mmcorrect |
|---|---|
| Width | 1,680 mmcorrect |
| Height | 1,250 mmcorrect |
| Wheelbase | 2,200 mmcorrect |
| Unladen weight | 1,095 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 6 V/2 Rcorrect |
| Forward gears | 6correct |
| Reverse gears | 2correct |
| Front tyres | 5.00-16correct |
| Rear tyres | 7-30 AScorrect |
| Top speed | 19.5 km/hcorrect |
Origin and approval
| Construction | semi-frame constructioncorrect |
|---|---|
| Units built | 228correct |
Where this model stands
Power-to-weight ratio: 8.7 kW/t (10 kW / 1.1 t)
Power class: Compact (< 40 hp)
Stronger than 2% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Eicher Muli G 13 have?
The Eicher Muli G 13 delivers 13 hp.
How much does the Eicher Muli G 13 weigh?
The unladen weight is 1,095 kg.
What engine does the Eicher Muli G 13 have?
1 cylinders, 667 cm³ displacement, Diesel.
How fast does the Eicher Muli G 13 go?
Top speed is 19.5 km/h.
What are the dimensions of the Eicher Muli G 13?
3,085 mm × 1,680 mm × 1,250 mm.
When was the Eicher Muli G 13 built?
Production years: 1956–1958.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.