Eicher ED 26
Built: 1956–1960 · Series: ED
More machines from model year 1956
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Eicher ED series (1948–1959) – the first post-war Eichers: ED 13 to ED 33, the number as hp, /I and /II as upgrade levels, air-cooled one- and two-cylinders at 1,500 rpm, 10 to 24 kW
ED stands for Eicher Diesel, and the ED series is the programme with which the Eicher brothers of Forstern motorised the German smallholder after the war: one- and two-cylinder tractors with air-cooled engines of their own manufacture, which Eicher had built since 1936 as one of the first makers – no radiator, no frost damage, no water pump. The type logic: the number gives the output in hp – ED 13, ED 14, ED 16 and ED 20 the single-cylinders, ED 26, ED 30 and ED 33 the twins – /I and /II the upgrade levels, ED 110 the export version that ran abroad as the E 17. The low rated speeds of 1,500 to 1,600 rpm and the displacements of 1.3 to 2.9 litres show the design: slow-running, large-volume engines with high torque as they shaped the time before the high-speed era.
Read on 3 more paragraphs
The register lists 10 versions with 9.5 to 24.2 kW (14 to 33 hp), 1,298 to 2,851 cm³ with one or two cylinders, unladen weights from 1,110 to 2,170 kg, lengths from 2,420 to 3,168 mm, widths from 1,500 to 1,580 mm and heights from 1,520 to 1,815 mm; the recorded linkage lifts 625 kg.
The ED Eichers competed with Lanz Bulldog, Fendt Dieselross and Hanomag for the 10 to 20 hectare farm; air cooling became the trademark Eicher kept to the end.
Used EDs are the classic Eicher collector tractors; when buying, originality, the condition of cylinder, piston and blower, injection pump, gearbox and brakes and parts supply through the Eicher club scene are what count.
Sources: SpecCodex register, model data: Eicher ED, Eicher (Traktorenhersteller) (Wikipedia)
Technical data
Engine
| Power | 26 hpcorrect |
|---|---|
| Power | 26 hpcorrect |
| Cylinders | 2correct |
| Displacement | 2,596 cm³correct |
| Bore | 105 mmcorrect |
| Stroke | 150 mmcorrect |
Dimensions and weights
| Length | 3,035 mmcorrect |
|---|---|
| Width | 1,520 mmcorrect |
| Height | 1,700 mmcorrect |
| Wheelbase | 1,888 mmcorrect |
| Ground clearance | 350 mmcorrect |
| Unladen weight | 1,810 kgcorrect |
Drivetrain and chassis
| Forward gears | 5correct |
|---|---|
| Reverse gears | 1correct |
| Front tyres | 5.50-16correct |
| Rear tyres | 10-28correct |
| Top speed | 18 km/hcorrect |
Working data
| Fuel tank capacity | 28 lcorrect |
|---|
Origin and approval
| Units built | 1,235correct |
|---|
Where this model stands
Power-to-weight ratio: 10.6 kW/t (19 kW / 1.8 t)
Power class: Compact (< 40 hp)
Stronger than 14% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Eicher ED 26 have?
The Eicher ED 26 delivers 26 hp.
How much does the Eicher ED 26 weigh?
The unladen weight is 1,810 kg.
What engine does the Eicher ED 26 have?
2 cylinders, 2,596 cm³ displacement.
How fast does the Eicher ED 26 go?
Top speed is 18 km/h.
What are the dimensions of the Eicher ED 26?
3,035 mm × 1,520 mm × 1,700 mm.
When was the Eicher ED 26 built?
Production years: 1956–1960.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.