Eicher 342 S
Built: 1976–1979 · Series: 300er
More machines from model year 1976
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Eicher 300 series – narrow-track special-crop tractors from Forstern: 334 to 365, two- to four-cylinder diesels, width under 1.2 m, 1,330–1,970 kg
The Eicher 300 series bundles compact, narrow-track tractors from the Bavarian maker with type numbers 334, 342, 352 and 365; the S and AS suffixes mark different equipment or drive variants of the same base version. With widths under 1.2 metres, the line targeted work in narrow row crops such as vineyards and orchards, as well as tight farmyard situations where standard tractors are too wide.
Read on 3 more paragraphs
The register lists 6 versions rated at 34 to 52 hp from two- to four-cylinder diesel engines of 1,963 to 3,927 cm³, kerb weights of 1,330 to 1,970 kg, and a length of 2,715 to 3,480 mm, a width of 885 to 1,195 mm and a height of 1,210 to 1,230 mm, at around 2,150 rpm.
Narrow-track tractors such as the Eicher 300 series remain in demand at special-crop farms to this day, because they can turn between tight rows of vines or trees without damaging the crop; competition came from similarly narrow-built models from other German and Italian makers. The low overall height of around 1.2 metres also makes it easier to pass under low-hanging branches and foliage walls.
On these compact tractors, check engine and clutch condition, the mechanical gearbox, the hydraulics, and corrosion on the narrow bodywork and wings; given work between vine rows, it is worth checking the steering and front axle for wear. Spares are supplied by specialist Eicher dealers and vintage parts stockists.
Sources: SpecCodex register, model data: Eicher 300er
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 42 hpcorrect |
| Power | 42 hpcorrect |
| Rated speed | 2,000 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 2,944 cm³correct |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 2,820 mmcorrect |
|---|---|
| Width | 910 mmcorrect |
| Height | 1,210 mmcorrect |
| Wheelbase | 1,955 mmcorrect |
| Unladen weight | 1,400 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 11V / 2Rcorrect |
| Forward gears | 8correct |
| Reverse gears | 2correct |
| Top speed | 24 km/hcorrect |
Where this model stands
Power-to-weight ratio: 22.1 kW/t (31 kW / 1.4 t)
Power class: Universal (40–100 hp)
Stronger than 27% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Eicher 342 S have?
The Eicher 342 S delivers 42 hp.
How much does the Eicher 342 S weigh?
The unladen weight is 1,400 kg.
What engine does the Eicher 342 S have?
3 cylinders, 2,944 cm³ displacement, Diesel.
How fast does the Eicher 342 S go?
Top speed is 24 km/h.
What are the dimensions of the Eicher 342 S?
2,820 mm × 910 mm × 1,210 mm.
When was the Eicher 342 S built?
Production years: 1976–1979.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.