Dynapac F161W – specifications
Series: Dynapac Asphalt Paver
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Dynapac asphalt pavers F and SD – from Wardenburg: F1200C to F3030C, SD1800 to SD2550, C for crawler, W for wheel, Cummins and Deutz engines, 28 to 194 kW
Dynapac's pavers are built at the Wardenburg plant near Oldenburg, which grew out of the paver maker Hoes and has belonged to Dynapac since the 1980s; the Swedish brand was part of Atlas Copco from 2007 to 2017 and has since belonged to the French Fayat group, which with Bomag also holds the second big compaction supplier. The F range (F800 to F3030) orders the pavers by size – F800 and F1000 the small pavers for paths and repairs, F1200 to F1800 the mid-range, F2500 and F3030 the highway pavers – and the letter names the undercarriage: C for crawler, W for wheel, CS and WS for the version with high-compaction screed. The SD range from 2011 (SD1800, SD2500, SD2550) is the successor generation of the same classes with new controls; FC1300 to FC1600 are compact pavers, F121 to F161 older types.
Read on 3 more paragraphs
The register lists 26 versions with 28.3 to 194 kW – Cummins QSB 6.7 in the big pavers, Deutz TD 2.9 and TD 4 in the mid-range, Kubota in the small ones – rated speeds of 1,800 to 2,300 rpm and lengths from 2,997 to 6,760 mm.
Dynapac's pavers are known for their screeds: high-compaction screeds with tampers and pressure bars that compact surface courses during laying to values elsewhere reached only by the roller, and screed widths of over ten metres for motorways and airports.
On used pavers, wear of slat conveyor, auger and screed plates, the condition of screed heating and extensions, undercarriage or tyres, the grade-control automation and the engine's service history are what count.
Sources: SpecCodex register, model data: Dynapac Asphaltfertiger, Dynapac (Fayat Group, Hersteller)
Technical data
Engine
| Engine model | QSB6.7C-190correct |
|---|---|
| Power | 199.7 hp (146.9 kW)correct |
| Rated speed | 1,800 rpmcorrect |
| Displacement | 6,700.7 cm³correct |
Drivetrain and chassis
| Tyre size | Front 560/300-390, Rear 13.00R-22.5correct |
|---|
Other data
| System voltage | 24 Vcorrect |
|---|
Frequently asked questions
How much power does the Dynapac F161W have?
The Dynapac F161W delivers 200 hp.
What engine does the Dynapac F161W have?
6,701 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Asphalt paver in 3D section
Turn the model, look inside and click an assembly — each one is explained.
