Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Dodge › Umpikorinen (BB) › Umpikorinen (BB) 6690cm3 A

Dodge Umpikorinen (BB) 6690cm3 A

Built: 2008 · Series: Umpikorinen (BB)

More machines from model year 2008

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Umpikorinen (BB) 6690cm3 A from Dodge is part of the Umpikorinen (BB) series. Production: 2008. The engine delivers 261 kW, has 8 cylinders, with a displacement of 6,690 cm³. The vehicle is 6,310 mm long and 2,100 mm wide. The unladen weight is 3,495 kg. The gross vehicle weight is 4,083 kg. The Umpikorinen (BB) series covers 8 models. Rated output within it ranges from 68 to 261 kW; the Umpikorinen (BB) 6690cm3 A sits at the top of that range with 261 kW. Its immediate neighbours are the Umpikorinen (BB) 4ov 6686cm3 below it with 260 kW. Unladen weight within it ranges from 2,400 to 3,600 kg; here the Umpikorinen (BB) 6690cm3 A sits at the top of that range with 3,495 kg. 1343 Dodge models across 29 series are on record.

Dodge Umpikorinen (BB) – Finnish registration collective page of Dodge trucks with a closed box body: 8 versions, 68 to 261 kW, 3.2 to 6.7 litres displacement, 4 to 4.8 tonnes gross vehicle weight

From the 1960s to the early 1980s, Dodge built medium trucks for the European market at Kew in Britain, until Renault Véhicules Industriels took over Chrysler Europe's truck division in 1981 and gradually folded these ranges into the Renault line-up. This collective page gathers Dodge chassis listed in the Finnish Traficom register under the body type “Umpikorinen (BB)” – vehicles with a closed box body.

Read on 3 more paragraphs

The register lists 8 versions with 68 to 261 kW from six- to eight-cylinder engines of 3,240 to 6,690 cm³. Unladen weights range from 2,400 to 3,600 kg, gross vehicle weights from 3,992 to 4,780 kg, lengths from 4,900 to 6,310 mm and widths from 1,900 to 2,148 mm.

Box bodies on Dodge chassis served in Finland as distribution and tradesman vehicles and as a base for workshop and refrigerated bodies; the spread from six- to eight-cylinder engines shows that both lighter distribution vehicles and more powerful versions are listed in the register. After the Dodge brand ended in Europe, many of these chassis continued in service under the Renault name.

When buying these Dodge box trucks, check rust on the frame and box body, the condition of the clutch and gearbox, and the tightness of the cooling and fuel systems on these now-historic vehicles. Drivetrain parts are partly available through the Renault network, while box body parts are found only through specialists in historic commercial vehicles.

Sources: SpecCodex register, model data: Dodge Umpikorinen (BB), Zulassungsdaten Traficom (Finnland), Dodge (Wikipedia)

Technical data

Engine

Power261 kWcorrect
Cylinders8correct
Displacement6,690 cm³correct

Dimensions and weights

Length6,310 mmcorrect
Width2,100 mmcorrect
Unladen weight3,495 kgcorrect
Gross vehicle weight4,083 kgcorrect

Where this model stands

Power-to-weight ratio: 74.7 kW/t (261 kW / 3.5 t)

Stronger than 43% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Dodge Umpikorinen (BB) 6690cm3 A have?

The Dodge Umpikorinen (BB) 6690cm3 A delivers 261 kW.

How much does the Dodge Umpikorinen (BB) 6690cm3 A weigh?

The unladen weight is 3,495 kg.

What is the gross vehicle weight of the Dodge Umpikorinen (BB) 6690cm3 A?

4,083 kg.

What engine does the Dodge Umpikorinen (BB) 6690cm3 A have?

8 cylinders, 6,690 cm³ displacement.

What are the dimensions of the Dodge Umpikorinen (BB) 6690cm3 A?

6,310 mm × 2,100 mm.

When was the Dodge Umpikorinen (BB) 6690cm3 A built?

Production years: 2008.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare