Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Dodge › Umpikorinen (BB) › Umpikorinen (BB) 5900cm3

Dodge Umpikorinen (BB) 5900cm3

Built: 1994 · Series: Umpikorinen (BB)

More machines from model year 1994

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the Umpikorinen (BB) 5900cm3, Dodge offers a model from the Umpikorinen (BB) series. Production: 1994. The engine delivers 117 kW, has 6 cylinders, with a displacement of 5,900 cm³. The vehicle is 6,120 mm long and 1,900 mm wide. The unladen weight is 2,810 kg. The gross vehicle weight is 3,992 kg. The Umpikorinen (BB) series covers 8 models. Rated output within it ranges from 68 to 261 kW; the Umpikorinen (BB) 5900cm3 sits in the lower part of that range with 117 kW. Its immediate neighbours are the Umpikorinen (BB) 4ov 3240cm3 below it with 84 kW and the Umpikorinen (BB) 2ov 5880cm3 above it with 118 kW. Unladen weight within it ranges from 2,400 to 3,600 kg; here the Umpikorinen (BB) 5900cm3 sits in the lower part of that range with 2,810 kg. 1343 Dodge models across 29 series are on record.

Dodge Umpikorinen (BB) – Finnish registration collective page of Dodge trucks with a closed box body: 8 versions, 68 to 261 kW, 3.2 to 6.7 litres displacement, 4 to 4.8 tonnes gross vehicle weight

From the 1960s to the early 1980s, Dodge built medium trucks for the European market at Kew in Britain, until Renault Véhicules Industriels took over Chrysler Europe's truck division in 1981 and gradually folded these ranges into the Renault line-up. This collective page gathers Dodge chassis listed in the Finnish Traficom register under the body type “Umpikorinen (BB)” – vehicles with a closed box body.

Read on 3 more paragraphs

The register lists 8 versions with 68 to 261 kW from six- to eight-cylinder engines of 3,240 to 6,690 cm³. Unladen weights range from 2,400 to 3,600 kg, gross vehicle weights from 3,992 to 4,780 kg, lengths from 4,900 to 6,310 mm and widths from 1,900 to 2,148 mm.

Box bodies on Dodge chassis served in Finland as distribution and tradesman vehicles and as a base for workshop and refrigerated bodies; the spread from six- to eight-cylinder engines shows that both lighter distribution vehicles and more powerful versions are listed in the register. After the Dodge brand ended in Europe, many of these chassis continued in service under the Renault name.

When buying these Dodge box trucks, check rust on the frame and box body, the condition of the clutch and gearbox, and the tightness of the cooling and fuel systems on these now-historic vehicles. Drivetrain parts are partly available through the Renault network, while box body parts are found only through specialists in historic commercial vehicles.

Sources: SpecCodex register, model data: Dodge Umpikorinen (BB), Zulassungsdaten Traficom (Finnland), Dodge (Wikipedia)

Technical data

Engine

Power117 kWcorrect
Cylinders6correct
Displacement5,900 cm³correct

Dimensions and weights

Length6,120 mmcorrect
Width1,900 mmcorrect
Unladen weight2,810 kgcorrect
Gross vehicle weight3,992 kgcorrect

Where this model stands

Power-to-weight ratio: 41.6 kW/t (117 kW / 2.8 t)

Stronger than 11% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Dodge Umpikorinen (BB) 5900cm3 have?

The Dodge Umpikorinen (BB) 5900cm3 delivers 117 kW.

How much does the Dodge Umpikorinen (BB) 5900cm3 weigh?

The unladen weight is 2,810 kg.

What is the gross vehicle weight of the Dodge Umpikorinen (BB) 5900cm3?

3,992 kg.

What engine does the Dodge Umpikorinen (BB) 5900cm3 have?

6 cylinders, 5,900 cm³ displacement.

What are the dimensions of the Dodge Umpikorinen (BB) 5900cm3?

6,120 mm × 1,900 mm.

When was the Dodge Umpikorinen (BB) 5900cm3 built?

Production years: 1994.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare