Dinkel DSATMW 48000
Built: 2007 · Series: Other models
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Dinkel – other models: trailers outside the named ranges, from tipping and skip trailers to heavy tandem and tridem versions, 1.76 to 12.7 t unladen weight
This page gathers the Dinkel trailers the register could not assign to a named range. The model list is shaped by type codes such as DSAKW, DSAM, DSAPP, DSATM, DSATMV, DTAC, DTAJ and DTSAV, pointing to different axle and body variants for tipping, skip and low-loader trailers, each followed by a four-digit type number.
Read on 3 more paragraphs
The register lists 31 versions here with unladen weights from 1,760 to 12,740 kg and gross vehicle weights from 10,200 to 54,000 kg. Widths run from 2,500 to 2,560 mm.
Heavy tipping and low-loader trailers in this weight class serve earthmoving, recycling and agricultural haulage, competing with other German and central European builders of skip and tandem-axle trailers for construction site use; the presence of tridem versions alongside lighter tandem-axle units shows how broad the catalogue is in this segment.
When buying used, this class calls for checking the condition of the skip or load bed, hydraulic rams and tipping mechanism, corrosion on the frame and axle mounts, and the function of the brake system and coupling. On the heaviest tridem versions the steering axles and tyre wear are also worth checking; spare parts come through the manufacturer and workshops specialising in construction-site trailers; on heavily used skip trailers the condition of the floor wear plates says a great deal about prior service.
Sources: SpecCodex register, model data: Dinkel (weitere Modelle)
Technical data
Dimensions and weights
| Length | 13,980 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,700 mmcorrect |
| Unladen weight | 8,700 kgcorrect |
| Gross vehicle weight | 45,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Dinkel DSATMW 48000 weigh?
The unladen weight is 8,700 kg.
What is the gross vehicle weight of the Dinkel DSATMW 48000?
45,000 kg.
Up to what speed is the Dinkel DSATMW 48000 approved?
Approved up to 100 km/h.
What are the dimensions of the Dinkel DSATMW 48000?
13,980 mm × 2,550 mm.
When was the Dinkel DSATMW 48000 built?
Production years: 2007.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
DINKEL
DSAKW 35000
DSAM 37200
DSAM37200
DSAPP 39000
DSAPP 9000
DSAPP39000
DSAPPV 41 000
DSATM 34000
DSATM 40720
DSATM 54000
DSATMV 42000
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
