Deutz-Fahr Agroplus 75
Series: Agroplus
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Deutz-Fahr Agroplus – Compact Class From 1997 Into the 2010s, with Three- and Four-Cylinder Engines, 45.6 to 70 kW and Operating Weight from 2,750 to 4,160 kg
The Agroplus series has complemented the Deutz-Fahr range since 1997 as the compact entry class below the Agrotron series; the register lists models up to 2013. Engine output ranges from 45.6 to 70 kW, with models rated in horsepower spanning 70 to 94 hp, using three- and four-cylinder engines with displacement from 3,000 to 4,086 cm³.
Read on 3 more paragraphs
Recorded operating weight runs from 2,750 to 4,160 kg, and top speed of the listed models is 40 km/h. Later models such as the Agroplus 420 Profiline show that the series gained higher-grade equipment lines over the years.
The Agroplus series targets smaller and medium farms as well as grassland operations that need a compact, manoeuvrable tractor without the bulk of the Agrotron models. For a used model, check the emissions stage, as it differs considerably by model year.
With rated outputs from 45.6 to 70 kW, the Agroplus series falls within ISO 730 Category I to II for the rear three-point hitch, with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute. Deutz-Fahr as a tractor brand belongs to the Italian SDF Group (SAME Deutz-Fahr), which is a separate company from the Cologne engine maker Deutz AG; both still supply spare parts for their respective ranges today, including for the older Agroplus model years covered here.
Sources: SpecCodex register, model data: Deutz-Fahr Agroplus, Deutz-Fahr
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
AGROPLUS 310 DT E3
AGROPLUS 410 DT
AGROPLUS 67
AGROPLUS 87
AGROPLUS 95
Agroplus 420 PROFILINE
Agroplus 70
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
