Deutz-Fahr D 7007 (C)
Built: 1982–1984 · Series: Baureihe 07
More machines from model year 1982
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Deutz D 7007 (C): air-cooled tractor from the 07 series built 1982 to 1984 with a 3.8-litre four-cylinder engine, 51 kW and a 25 km/h top speed
The 07 series was an air-cooled Deutz tractor range from the 1980s; the D 7007 (C) was built from 1982 to 1984. On Deutz models in this series, the number in the type designation roughly matched the engine's output in hp, as borne out by the D 7007's 70 hp.
Read on 3 more paragraphs
The air-cooled four-cylinder diesel engine with 3,768 cm³ of displacement produces 70 hp, or 51 kW, at 2,300 rpm, with 245 Nm of torque. At 2,860 kg, 3,760 mm long, 2,540 mm high, 1,990 mm wide and with a 2,170 mm wheelbase, top speed is limited to 25 km/h.
With a 25 km/h top speed, the D 7007 (C) was built purely for field and yard work, not for brisk road travel; 51 kW from an air-cooled four-cylinder was enough for tilling medium-sized fields with a plough or cultivator and for working with forage wagons and trailers around the farm. The 245 Nm of torque at 2,300 rpm was typical for a four-cylinder of this displacement in its day and was enough for power-take-off work at the 540 rpm standard.
When buying a used air-cooled Deutz from these years, the condition of the cooling fan and cylinder fins matters, since dirty fins lead to overheating. Also worth checking are the clutch, gearbox and brakes, along with corrosion on the frame, fenders and step plates, which is often well advanced on machines of this age. On a four-cylinder without coolant, it is also worth checking the valve-cover gaskets, since oil leaks here show up directly on the cooling fins.
Sources: SpecCodex-Register: Kennwerte des Modells D 7007 (C), Deutz-Fahr (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 70 hp (51 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Torque | 245 Nmcorrect |
| Speed at max. torque | 1,603 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,768 cm³correct |
| Bore | 100 mmcorrect |
| Stroke | 120 mmcorrect |
| Injection pressure | 175 barcorrect |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 3,760 mmcorrect |
|---|---|
| Width | 1,990 mmcorrect |
| Height | 2,540 mmcorrect |
| Wheelbase | 2,170 mmcorrect |
| Ground clearance | 550 mmcorrect |
| Unladen weight | 2,860 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 12V/4Rcorrect |
| Front tyres | 7.50-20 ASF (A: 12.4-24 AS)correct |
| Rear tyres | 16.9-34 AScorrect |
| Top speed | 25 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 17.8 kW/t (51 kW / 2.9 t)
Power class: Universal (40–100 hp)
Stronger than 47% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Deutz-Fahr D 7007 (C) have?
The Deutz-Fahr D 7007 (C) delivers 70 hp.
How much does the Deutz-Fahr D 7007 (C) weigh?
The unladen weight is 2,860 kg.
What engine does the Deutz-Fahr D 7007 (C) have?
4 cylinders, 3,768 cm³ displacement, Diesel.
How fast does the Deutz-Fahr D 7007 (C) go?
Top speed is 25 km/h.
What are the dimensions of the Deutz-Fahr D 7007 (C)?
3,760 mm × 1,990 mm × 2,540 mm.
When was the Deutz-Fahr D 7007 (C) built?
Production years: 1982–1984.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
