Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Deutz-Fahr › 5G › 5090 G

Deutz-Fahr 5090 G

Built: 2010s · Series: 5G

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the 5090 G, Deutz-Fahr offers a model from the 5G series. The engine delivers 88 hp (65 kW), has 3 cylinders, with a displacement of 2,887 cm³. Rated speed is 2,200 rpm. The machine is 4,100 mm long, 2,037 mm wide and 2,650 mm high. The unladen weight is 3,620 kg. The wheelbase measures 2,295 mm. Top speed is 40 km/h. The engine is water-cooled. Tyres: rear 420 R70 30. The fuel is diesel. Rated output across the Deutz-Fahr range ranges from 29 to 305 hp; the 5090 G sits in the lower part of that range with 88 hp. Its immediate neighbours are the Agrotron K 90 (Profiline) below it with 84 hp and the Agrotron K 410 above it with 89 hp. Rated output across the Deutz-Fahr range ranges from 29 to 305 hp; here the 5090 G sits in the lower part of that range with 88 hp. 692 Deutz-Fahr models across 50 series are on record.

Deutz-Fahr 5090 G: water-cooled three-cylinder utility tractor of the Series 5G with 2,887 cm³ displacement, 88 hp (65 kW) and 3,620 kg weight

Deutz-Fahr also offers the 5G variant within the Series 5. Like the D and C versions of the Series 5, the 5090 G belongs to the class of compact utility tractors for smaller and medium-sized agricultural holdings, rounding out the range with its own equipment line.

Read on 3 more paragraphs

The three-cylinder diesel engine with 2,887 cm³ displacement is water-cooled and produces 88 hp, or 65 kW, at 2,200 rpm. At 3,620 kg weight, 4,100 mm length, 2,037 mm width and 2,650 mm height, the 5090 G sits somewhat above the weight of the Ecoline and Keyline versions of the series, with almost the same displacement and a similar engine layout.

With a top speed of 40 km/h, the 5090 G reaches the upper limit of driving licence category L. The water-cooled three-cylinder engine with 88 hp suits tillage, grassland maintenance and transport work on medium-sized holdings; the three-point linkage and power take-off allow operation of the usual implements in this output class.

When buying a 5090 G, check the condition of the radiator and coolant hoses, and the tightness of the hydraulic system at the lift arms. Also check the clutch and gearbox, and whether the recorded hours of use are plausible given the machine's outward condition, as well as the condition of the cab and electrical system, which can see above-average strain on demonstrator machines.

Sources: SpecCodex-Register: Kennwerte des Modells Deutz-Fahr 5090 G, Deutz-Fahr (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power88 hp (65 kW)correct
Rated speed2,200 rpmcorrect
Cylinders3correct
Displacement2,887 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,100 mmcorrect
Width2,037 mmcorrect
Height2,650 mmcorrect
Wheelbase2,295 mmcorrect
Unladen weight3,620 kgcorrect

Drivetrain and chassis

Rear tyres420 R70 30correct
Top speed40 km/hcorrect

Where this model stands

Power-to-weight ratio: 18 kW/t (65 kW / 3.6 t)

Power class: Universal (40–100 hp)

Stronger than 60% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Deutz-Fahr 5090 G have?

The Deutz-Fahr 5090 G delivers 88 hp.

How much does the Deutz-Fahr 5090 G weigh?

The unladen weight is 3,620 kg.

What engine does the Deutz-Fahr 5090 G have?

3 cylinders, 2,887 cm³ displacement, Diesel.

How fast does the Deutz-Fahr 5090 G go?

Top speed is 40 km/h.

What are the dimensions of the Deutz-Fahr 5090 G?

4,100 mm × 2,037 mm × 2,650 mm.

When was the Deutz-Fahr 5090 G built?

Production years: 201?.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · UK government data (DVLA) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare