Start › Harvesting machinery › Detank › TB60

Detank TB60

Built: 2014-2015 · Series: Other models

Source: https://www.topagrar.com/markt/news/6-drv-ernteschaetzung-au

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TB60 comes from Detank. Production: 2014-2015. The engine delivers 92 hp. The engine comes from Yuchai/Luochai. The model was built in Wuhu, Anhui, China. The fuel is diesel. The engine fitted is the 123. Its predecessor was the Chery 8004LZ-6.0B0A. It was succeeded by the Zoomlion TB60. Rated output across the Detank range ranges from 25 to 197 hp; the TB60 sits in the lower part of that range with 92 hp. Its immediate neighbours are the RC904 below it with 90 hp and the RC1000 above it with 100 hp. 34 Detank models across 3 series are on record. The model is listed under Harvesting machinery. 13 verified figures from 1 source are on file.

Technical data

Engine

Engine makeYuchai/Luochaicorrect
Engine model123correct
Fueldieselcorrect
Power92 hpcorrect

Origin and approval

PlantWuhu, Anhui, Chinacorrect
PredecessorChery 8004LZ-6.0B0Acorrect
SuccessorZoomlion TB60correct

Frequently asked questions

How much power does the Detank TB60 have?

The Detank TB60 delivers 92 hp.

When was the Detank TB60 built?

Production years: 2014-2015.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

8000A

8000B

PL40

TA40

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare