StartHarvesting machineryDetank › TA40

Detank TA40

Built: 2014-2015 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Detank TA40 is a machine built by Detank. Production: 2014-2015. The engine delivers 108 hp (82 kW). The engine comes from Yuchai/Luochai. The model was built in Wuhu, Anhui, China. The fuel is diesel. Its predecessor was the Chery 4LZ-4.0A. It was succeeded by the Zoomlion TA40. Rated output across the Detank range ranges from 25 to 197 hp; the TA40 sits in the middle of that range with 108 hp. Its immediate neighbours are the RC1000 below it with 100 hp and the RC1100 above it with 110 hp. 34 Detank models across 3 series are on record. The model is listed under Harvesting machinery. 13 verified figures from 1 source are on file.

Technical data

Engine

Engine makeYuchai/Luochaicorrect
Fueldieselcorrect
Power108 hp (82 kW)correct

Origin and approval

PlantWuhu, Anhui, Chinacorrect
PredecessorChery 4LZ-4.0Acorrect
SuccessorZoomlion TA40correct

Frequently asked questions

How much power does the Detank TA40 have?

The Detank TA40 delivers 108 hp.

When was the Detank TA40 built?

Production years: 2014-2015.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare