StartTractorsDeca › A 46

Deca A 46

Built: 1971-1980 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Built in 1971-1980, the Deca A 46 is a tractor from Deca. The two-cylinder engine produces 34 kW.

It runs on diesel; the engine is air-cooled. The predecessor was the DECA A 45. Within the range, rated power spans from 18 to 100 kW; with 34 kW, the A 46 sits in the lower third. Directly alongside are the D 35 with 20 kW below and the A 52 with 39 kW above.

Technical data

Engine

Engine makeDeutzcorrect
Engine modelF2L1114 / F2L2114correct
Fueldieselcorrect
Power46 hp (34 kW)correct
Cylinders2correct
Turbochargernocorrect
Coolingair-cooledcorrect

Drivetrain and chassis

Driverear-wheel driveWDcorrect

Origin and approval

PlantBuenos Aires, Argentinacorrect
PredecessorDECA A 45correct

Frequently asked questions

How much power does the Deca A 46 have?

The Deca A 46 delivers 46 hp.

What engine does the Deca A 46 have?

2 cylinders, Diesel.

When was the Deca A 46 built?

Production years: 1971-1980.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare