Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › DAF Trucks › CF 480 FA

DAF Trucks CF 480 FA

Built: 2019-2023 · Series: CF

More machines from model year 2019

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The DAF Trucks CF 480 FA is a model in the CF series. Production: 2019-2023. The engine delivers 355 kW, with a displacement of 12,900 cm³. The unladen weight is 7,530 kg. The fuel is diesel. The EU vehicle category is N3. The CF series covers 102 models. Rated output within it ranges from 166 to 390 kW; the CF 480 FA sits in the upper part of that range with 355 kW. Its immediate neighbours are the CF 450 FTT below it with 330 kW and the CF 530 FA above it with 390 kW. Unladen weight within it ranges from 5,990 to 11,152 kg; here the CF 480 FA sits in the lower part of that range with 7,530 kg. 310 DAF Trucks models across 10 series are on record.

DAF CF – DAF Trucks' medium-duty distribution and long-haul range from Eindhoven: six- and more-cylinder diesel engines from 166 to 390 kW, displacements of 6.7 to 12.9 litres

The CF is DAF Trucks' medium-duty truck range, the company based in Eindhoven, designed to complement the heavy XF range for distribution and regional long-haul transport. The type designation consists of the CF range name, followed by a power figure in horsepower and a suffix for the cab variant: FA denotes the day cab, FT the taller long-haul cab, FAN, FAR and FAS further cab and suspension variants.

Read on 4 more paragraphs

The register lists 102 versions with engine outputs of 166 to 390 kW, displacements of 6,700 to 12,900 cm³ and unladen weights of 5,990 to 11,152 kg; nearly all versions recorded run on diesel.

The CF covers, at DAF, the broad field between light distribution truck and heavy tractor unit for long-haul transport, competing there with the MAN TGM/TGS, the Mercedes-Benz Atego/Actros and the Volvo FE/FM; its strength lies in the wide range of wheelbases, cab and body variants for municipal, construction and distribution traffic.

On a used example, what counts is the condition of the engine and exhaust after-treatment, corrosion on the frame and cab mounts, wear on the clutch and gearbox on manual versions, the function of the air suspension, and the well-organised parts supply through DAF's Europe-wide dealer network.

The CF is offered as standard with axle formulas 4x2, 6x2 and 6x4: 6x2 with a steered trailing axle gives high payload with good manoeuvrability, while 6x4 with two driven axles is designed for construction and tipper work on unstable ground. From the Euro VI emissions stage, exhaust after-treatment standardly requires SCR catalysis with AdBlue combined with a diesel particulate filter and exhaust-gas recirculation; on long-haul versions a retarder additionally supports the engine brake on long descents.

Sources: SpecCodex register, model data: DAF Trucks CF

Technical data

Engine

Fueldieselcorrect
Power355 kWcorrect
Displacement12,900 cm³correct

Dimensions and weights

Unladen weight7,530 kgcorrect

Drivetrain and chassis

Axles0correct

Origin and approval

EU categoryN3correct

Where this model stands

Power-to-weight ratio: 47.1 kW/t (355 kW / 7.5 t)

Stronger than 79% of the trucks in the register — out of 25,241 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the DAF Trucks CF 480 FA have?

The DAF Trucks CF 480 FA delivers 355 kW.

How much does the DAF Trucks CF 480 FA weigh?

The unladen weight is 7,530 kg.

What engine does the DAF Trucks CF 480 FA have?

12,900 cm³ displacement, Diesel.

When was the DAF Trucks CF 480 FA built?

Production years: 2019-2023.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare