Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › DAF › OPRIJ › OPRIJ LF 19-80

DAF OPRIJ LF 19-80

Built: 2023 · Series: OPRIJ

More machines from model year 2023

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The OPRIJ LF 19-80 from DAF is part of the OPRIJ series. Production: 2023. The engine has 6 cylinders, with a displacement of 6,690 cm³. The vehicle is 9,640 mm long and 2,410 mm wide. The unladen weight is 5,468 kg. The wheelbase measures 5,350 mm. Top speed is 90 km/h. The gross vehicle weight is 19,500 kg. The vehicle runs on 6 wheels. The OPRIJ series covers 53 models. Unladen weight within it ranges from 4,930 to 11,893 kg; the OPRIJ LF 19-80 sits at the bottom of that range with 5,468 kg. Its immediate neighbours are the OPRIJ XD 16-68 below it with 5,446 kg and the OPRIJ LF 12-63 above it with 5,640 kg. Gross vehicle weight within it ranges from 11,990 to 33,500 kg; here the OPRIJ LF 19-80 sits in the lower part of that range with 19,500 kg. 3352 DAF models across 109 series are on record.

DAF Oprij – the collective page of drive-on ramp bodies on DAF chassis of the CF, LF, XB and XD ranges, 53 versions, 4 to 6 cylinders, 4,460 to 12,902 cm³, gross weights from 11,990 to 33,500 kg

Oprij is Dutch for a drive-on or ramp vehicle and here denotes trucks on DAF chassis fitted with a ramp that cargo can drive onto by itself. The models are listed in the register under DAF and carry the abbreviations of the DAF ranges: LF for the light and medium range, CF for the classic medium and heavy range, and XB and XD as the newer ranges introduced from 2021, gradually replacing LF and CF. The numbers after the range letters give the weight class and engine output, such as LF 16-68 or CF 32-90; the suffixes D, V, K, S and OV denote body or equipment variants.

Read on 3 more paragraphs

The register lists here 53 versions with 4 to 6 cylinders and 4,460 to 12,902 cm³ displacement. Unladen weights lie between 4,930 and 11,893 kg, gross weights between 11,990 and 33,500 kg. Lengths range from 8,210 to 11,300 mm, widths from 2,280 to 2,550 mm.

Vehicles with a drive-on ramp on a DAF chassis are used to carry vehicles and self-propelled machines that drive onto the load bed via the ramp instead of being loaded by crane or tail lift. The span from the light LF range to the heavy CF range shows that this body type was fitted across almost the entire DAF commercial-vehicle programme.

On a used example of these DAF chassis, operating hours and the engine's service record, the condition of brakes and air suspension, corrosion on the frame and on the ramp itself, the function of the ramp's hydraulics or mechanism, and wear on the rollers and guide rails of the load bed all matter. Parts for chassis and engine run through the DAF dealer network, parts for the ramp bodywork through the respective body builders.

Sources: SpecCodex register, model data: DAF Oprij, DAF Trucks (manufacturer), Zulassungsdaten RDW (Niederlande)

Technical data

Engine

Cylinders6correct
Displacement6,690 cm³correct

Dimensions and weights

Length9,640 mmcorrect
Width2,410 mmcorrect
Wheelbase5,350 mmcorrect
Unladen weight5,468 kgcorrect
Gross vehicle weight19,500 kgcorrect

Drivetrain and chassis

Wheels6correct
Top speed90 km/hcorrect

Frequently asked questions

How much does the DAF OPRIJ LF 19-80 weigh?

The unladen weight is 5,468 kg.

What is the gross vehicle weight of the DAF OPRIJ LF 19-80?

19,500 kg.

What engine does the DAF OPRIJ LF 19-80 have?

6 cylinders, 6,690 cm³ displacement.

How fast does the DAF OPRIJ LF 19-80 go?

Top speed is 90 km/h.

What are the dimensions of the DAF OPRIJ LF 19-80?

9,640 mm × 2,410 mm.

When was the DAF OPRIJ LF 19-80 built?

Production years: 2023.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare