Cockshutt Golden Eagle Black Hawk
Built: 1955-1957 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Cockshutt Golden Eagle Black Hawk rolled off the line in 1955-1957 as a tractor. It is powered by a four-cylinder engine producing 29 kW.
It runs on petrol; the engine is water-cooled. Within the range, rated power spans from 18 to 123 kW; with 29 kW, the Golden Eagle Black Hawk sits in the lower third. Directly alongside are the 1250 with 28.7 kW below and the 550 diesel with 31 kW above.
Technical data
Engine
| Engine make | Perkinscorrect |
|---|---|
| Fuel | petrolcorrect |
| Power | 39 hp (29 kW)correct |
| Cylinders | 4correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|
Origin and approval
| Plant | Brantford, Ontario, Canadacorrect |
|---|
Frequently asked questions
How much power does the Cockshutt Golden Eagle Black Hawk have?
The Cockshutt Golden Eagle Black Hawk delivers 39 hp.
What engine does the Cockshutt Golden Eagle Black Hawk have?
4 cylinders, gasoline.
When was the Cockshutt Golden Eagle Black Hawk built?
Production years: 1955-1957.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.