CLARK AHW RJH
Built: 1975 · Series: Other models
More machines from model year 1975
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Clark AHW RJH – class O3 trailer: 8,000 kg gross weight, 7,120 kg unladen weight, 880 kg payload, 11.65 m length, model year 1975
With a gross weight of 8,000 kg, the AHW RJH falls into EU class O3, the medium-weight trailers between 3.5 and 10 tonnes. The trailer is registered in the Netherlands and was built in 1975.
Read on 3 more paragraphs
At a length of 11,650 mm and a width of 2,520 mm, it already weighs 7,120 kg unladen and can carry only 880 kg more, just eleven per cent of its gross weight. At a length of over 11.6 metres, that means the structure itself, not the load, makes up most of the weight – a hallmark of special trailers with their own heavy superstructure, such as ramps or a reinforced platform, rather than a light bed for general cargo. The 6,350 mm wheelbase places the axles in the rear third of the vehicle.
Trailers of this weight class run with an air-brake system instead of the simple overrun brake of the lighter O1 and O2 classes; towing the combination at this gross weight requires a category BE or C1E licence.
On such a heavy self-structure, what counts most on a used example is distortion and cracks in the frame and any ramps or loading rails, the condition of the axle bearings and brake drums, the state of the load platform and its lashing points, and – on a vehicle of this age – rust in the load-bearing side members, which needs particularly critical checking given the small remaining payload reserve.
Sources: SpecCodex-Register: Kennwerte des Modells Clark AHW RJH
Technical data
Dimensions and weights
| Length | 11,650 mmcorrect |
|---|---|
| Width | 2,520 mmcorrect |
| Wheelbase | 6,350 mmcorrect |
| Unladen weight | 7,120 kgcorrect |
| Gross vehicle weight | 8,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the CLARK AHW RJH weigh?
The unladen weight is 7,120 kg.
What is the gross vehicle weight of the CLARK AHW RJH?
8,000 kg.
Up to what speed is the CLARK AHW RJH approved?
Approved up to 100 km/h.
What are the dimensions of the CLARK AHW RJH?
11,650 mm × 2,520 mm.
When was the CLARK AHW RJH built?
Production years: 1975.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
