CLAAS Mäh-Dresch-Binder
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
CLAAS – other harvesting machines: the collective page of combines outside the named ranges, from the Matador through the Dominator and Commandor to the Mega and Avero, 1,950 to 10,600 kg unladen weight
This page gathers the CLAAS combine harvesters the register could not assign to a named range, spanning almost the whole company history of harvesting-machine building. CLAAS, founded in 1913 by August Claas in Harsewinkel, Westphalia, initially built binders and straw balers, brought out its first own combine, the Matador, in 1936, and with the Dominator and Commandor ranges of the 1970s to 1990s laid down the company's main model families ahead of today's Lexion. Alongside these the register also lists smaller and mid-size ranges such as the Compact, Consul, Cosmos, Columbus, Comet and Mega, and, with the Crop Tiger, a range designed for the Asian market.
Read on 3 more paragraphs
The register lists here 76 versions with unladen weights from 1,950 to 10,600 kg, lengths from 6,150 to 9,830 mm, widths from 2,520 to 5,700 mm and heights from 2,450 to 3,800 mm.
Alongside John Deere, CLAAS is one of the world's leading combine makers and market leader in Europe; the models gathered here trace the path of the family-run group from the first self-propelled combines of the post-war years to the direct forerunners of today's Lexion generation.
On used combines of this kind, the condition of the threshing drum and concave, wear on the straw walkers and sieves, the tightness of the grain-return channels, the condition of the cutterbar and chopper, and corrosion on frame and panels count; on the oldest ranges such as the Matador, parts supply is now only possible through the CLAAS archive and specialist dealers.
Sources: SpecCodex register, model data: CLAAS (weitere Erntemaschinen), CLAAS (manufacturer)
Technical data
Engine
| Engine | nonecorrect |
|---|
Dimensions and weights
| Length | 7,200 mmcorrect |
|---|---|
| Width | 5,300 mmcorrect |
| Height | 2,600 mmcorrect |
| Unladen weight | 2,400 kgcorrect |
Frequently asked questions
How much does the CLAAS Mäh-Dresch-Binder weigh?
The unladen weight is 2,400 kg.
What are the dimensions of the CLAAS Mäh-Dresch-Binder?
7,200 mm × 5,300 mm × 2,600 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikipedia (retrieved August 2026) · How we check the data
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.
